Energy Consumption Test Methods and Results for Servo- Pump Continuously Variable Transmission Control System
نویسندگان
چکیده
Test methods and data acquisition system specifications are described for measurements of the energy consumption of the control system of a servo-pump continuously variable transmission (CVT). Dynamic measurements of the power consumption of the servopump CVT control system show that the control system draws approximately 18.9 W-hrs of electrical energy over the HWFET cycle and 13.6 W-hrs over the 505 cycle. Sample results are presented of the dynamic power consumption of the servo-pump system under drive cycle conditions. Steady state measurements of the control power draw of the servo-pump CVT show a peak power consumption of 271 W, including lubrication power. The drive-cycle averaged and steady state energy consumption of the servo-pump CVT are compared to conventional CVT pump technologies.
منابع مشابه
Servo-Pump Hydraulic Control System Performance and Evaluation for CVT Pressure and Ratio Control
Fluid pumping losses are one of the major sources of torque loss in modern Continuously Variable Transmissions (CVTs) due to the high pressures and flow rates required in the hydraulic control system. To reduce the magnitude of these losses, researchers at UC Davis have developed a servo-pump control system for CVTs designed for improved pressure and ratio controllability with minimal power con...
متن کاملMulti-objective Optimization of Hybrid Electric Vehicle Equipped with Power-split Continuously Variable Transmission
This paper aims to find the efficient state of hybrid electric vehicle (HEV) by simultaneous optimization of the control strategy and the power train. The power transmission employed in this vehicle is a power-split continuously variable transmission (CVT) which uses several fixed ratio mechanisms. After describing this transmission, the rules of electric assist control strategy are introduced....
متن کاملModeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine
High-speed maglev train is considered an ideal vehicle in the 21st Century, as an important part of the train, the travel mechanism bears and delivers a variety of vertical and horizontal alternating load in operation, it affects the operation safety of the train directly, so key components of the travel mechanism should under fatigue strength test by fatigue test machine.The paper proposed a v...
متن کاملA novel pitch control system for a wind turbine driven by a variable-speed pump-controlled hydraulic servo system
The paper aims to develop a novel pitch control system for a large wind turbine driven by a variable-speed pump-controlled hydraulic servo system. To perform practical pitch control experiments, a full-scale test rig of the hydraulic pitch control system for a 2 MW wind turbine’s blade, including a novel pitch control mechanism, a variable-speed pump-controlled hydraulic servo system, a disturb...
متن کاملThe Velocity Control of the Electro-hydraulic Servo System
Abstract In general two basic methods are used for controlling the velocity of a hydraulic cylinder. First by an axial variable-displacement pump for controls flow to the cylinder. This configuration is commonly known as a hydrostatic transmission. Second by proportional valve powered by a constant-pressure source, such as a pressure compensated pump, drives the hydraulic cylinder. In this stud...
متن کامل