Energy Storage for Power Systems with Rapidly Changing Loads
نویسنده
چکیده
In areas with rapidly changing loads of large magnitude, utility companies often experience large deviations in frequency and area control error. Inadvertent tie-line power flow also occurs. The purpose of this research is to examine the effects a large scale energy storage device has on the system response to a rapidly changing load. Two control areas connected by a tie-line are modelled and simulations are performed to determine the response to a step change in load and also to a five-stand rolling mill load. For each type of load, three cases are studied: no energy storage in the system, a superconducting magnetic energy storage device in the system, and a battery energy storage device in the system. Each case is analyzed and the improvements in system operation for each of the energy storage devices is discussed. CHAPTER
منابع مشابه
Optimal energy management of the photovoltaic based distribution networks considering price responsive loads, energy storage systems and convex power flows.
Nowadays, presence of photovoltaic systems in distribution network is not without challenge and it may not have economic productivity for the system under the lack of optimal management. Energy storage systems are able to cope with this problem. Therefore, in this paper, a new method is proposed for energy management of the distribution networks in order to show that how presence of the energy ...
متن کاملDC Microgrid Protection in the Presence of the Photovoltaic and Energy Storage Systems
In recent years, most of the loads and distributed generations are connected to the AC grid through the power electronic converters. Using the DC grid beside the AC grid can reduce the conversion stages and power losses. Protection of the DC grids is a challenging issue because of the new structures of DC grids and fast transients of the DC faults. This paper studies the protection of the low v...
متن کاملReview, analysis and simulation of different structures for hybrid electrical energy storages
Output power in a hybrid power system is constant while the input power with variable characteristics that is generated by different sources. Using Hybrid Electrical Energy Storage (HEES) systems, is growing rapidly since there is an obvious need for clean energy. This paper introduces different parts of a HEES system and then proposes HEES systems which employ battery, ultracapacitor and f...
متن کاملOptimal Torque Control of PMSG-based Stand-Alone Wind Turbine with Energy Storage System
In this paper optimal torque control (OTC) of stand-alone variable-speed small-scale wind turbine equipped with a permanent magnet synchronous generator and a switch- mode rectifier is presented. It is shown that with OTC method in standalone configuration, power coefficient could be reached to its maximum possible value, i.e. 0.48. An appropriate control algorithm based on turbine characterist...
متن کاملImplementation of Optimal Load Balancing Strategy for Hybrid Energy Management System in DC/AC Microgrid with PV and Battery Storage
The proposed paper presents the DC/AC microgrid modeling using the Energy storage units and photovoltaic (PV) panels. The modal consists of a two stage power conversion. The power is supplied to the both DC and AC loads by this PV solar panels. The suitable way to explore the PV generation model is by using manufacturer datasheet. A bidirectional converter is connected to the battery storage sy...
متن کامل