First Experimental Results of Load Carrying Capacity for a Planar Cable-suspended Manipulator
نویسندگان
چکیده
In this paper a performance analysis is presented for a cable-suspended parallel manipulator. Experimental results from some first tests are presented and discussed to validate the theoretical calculation of load carrying capacity. The loadcarrying capacity during a given trajectory is obtained. This computational technique is tested on a typical planar cable suspended manipulator. The experiment is performed to compare the calculated maximum load with the actual carrying payload on the path chosen for the comparison.
منابع مشابه
Optimal Trajectory of Flexible Manipulator with Maximum Load Carrying Capacity
In this paper, a new formulation along with numerical solution for the problem of finding a point-to-point trajectory with maximum load carrying capacities for flexible manipulators is proposed. For rigid manipulators, the major limiting factor in determining the Dynamic Load Carrying Capacity (DLCC) is the joint actuator capacity. The flexibility exhibited by light weight robots or by robots o...
متن کاملMaximum Allowable Load On Wheeled Mobile Manipulators (RESEARCH NOTE)
This paper develops a computational technique for finding the maximum allowable load of mobile manipulators for a given trajectory. The maximum allowable loads which can be achieved by a mobile manipulator during a given trajectory are limited by the number of factors; probably the dynamic properties of mobile base and mounted manipulator, their actuator limitations and additional constraints a...
متن کاملModeling a Planar Point Mass Sagged Cable-Suspended Manipulator
This paper deals with the kinetostatic model for a planar point mass cable-driven parallel manipulator when the cable elasticity and configuration have been fully taken into account. An exact model solution for the statics is obtained by consider elastic hefty cables. The proposed formulation allows considering specific behavior of cables for large dimensions cable-suspended robots in which the...
متن کاملTrajectory Optimization of Cable Parallel Manipulators in Point-to-Point Motion
Planning robot trajectory is a complex task that plays a significant role in design and application of robots in task space. The problem is formulated as a trajectory optimization problem which is fundamentally a constrained nonlinear optimization problem. Open-loop optimal control method is proposed as an approach for trajectory optimization of cable parallel manipulator for a given two-end-po...
متن کاملOptimal Load of Flexible Joint Mobile Robots Stability Approach
Optimal load of mobile robots, while carrying a load with predefined motion precision is an important consideration regarding their applications. In this paper a general formulation for finding maximum load carrying capacity of flexible joint mobile manipulators is presented. Meanwhile, overturning stability of the system and precision of the motion on the given end-effector trajectory are take...
متن کامل