Pressure Swing Distillation Simulation and Optimization of Azeotropic IBA + IBAc Mixture
نویسندگان
چکیده
The present work is to simulate and analyze pressure-swing distillation process for azeotropic IBA-IBAc separation using CHEMCAD simulation software. The total number of feed plates, reflux ratio in first column and total number of plates, operating pressure and the feed stream concentration of IBA for the second column are varied to find the optimum feed plate location, to get the desired output i.e. 99.5 mol % IBAc and 98.5 mol % IBA as bottoms from the first and second column respectively, which gives the minimum total heat duty. General Terms Simulation, Optimization
منابع مشابه
Separation of tetrahydrofuran and water using pressure swing distillation: Modeling and optimization
−Computer simulations were performed to obtain highly pure tetrahydrofuran (THF) with over 99.9 mole% from the mixture of THF and water. Pressure swing distillation (PSD) was used since the azeotropic point between tetrahydrofuran and water can be varied with pressure. A commercial process simulator, PRO/II with PROVISION release 8.3, was used for the simulation studies. The Wilson liquid activ...
متن کاملBK1064-ch68_R2_250706 PRESSURE SWING BATCH DISTILLATION FOR HOMOGENOUS AZEOTROPIC SEPARATION
The separation of the homogeneous azeotropic mixture acetonitrile/water by pressure swing distillation (PSD) is considered. The PSD is operated as a discontinuous (batch) process and two batch modes, regular and inverted, are considered. The processes are analysed, aspects as to which batch mode should be preferred are discussed, and a dynamic model for both batch PSD processes is formulated. T...
متن کاملHomogeneous azeotropic pressure swing distillation: continuous and batch process
The separation of a binary homogeneous azeotropic mixture using pressure swing distillation will be analysed on the example of acetonitrile/water. Two different processes are considered: the continuous heatand mass-integrated process and the inverted batch process. For both processes a model is developed and experimental data are given. In the paper the potential of the pressure swing distillat...
متن کاملSeparation of Binary mixture using Pressure Swing Distillation with Heat Integration
This paper addresses the internal heat integration to the pressure-swing distillation process used in the separation of binary azeotrope mixture. A general procedure is suggested and illustrated through the separation of an binary mixture, which forms pressure-sensitive minimum-boiling azeotropes. Comparisons are made between the conventional and the internally heat integration processes. It is...
متن کاملNew Column Configurations for Pressure Swing Batch Distillation Rigorous Simulation Calculations
The pressure swing distillation in different batch column configurations is investigated by rigorous simulation calculations. The calculations are made by a professional flow-sheet simulator for the separation of a minimum (ethanol–toluene) and a maximum boiling (water– ethylene-diamine) azeotropic mixture. Besides studying the well known configurations (rectifier, stripper) we also investigate...
متن کامل