Serration Behavior in Pd77.5Cu6Si16.5 Alloy

نویسندگان

  • Zhong Wang
  • Jiaojiao Li
  • Bo Yuan
  • Rongfeng Wu
  • Jing Fan
  • Baocheng Wang
  • Junwei Qiao
چکیده

The strain-rate-dependent plasticity under uniaxial compression at the strain rates of 2× 10−3, 2 × 10−4 and 2 × 10−5 s−1 in a Pd77.5Cu6Si16.5 alloy is investigated. At different strain rates, the serration events exhibit different amplitudes and time scales. The intersection effects take place obviously, and the loading time is much longer than the relaxation time in the serration event at three strain rates. However, the time intervals between two neighboring serrations lack any time scale, and the elastic energy density displays a power-law distribution at the strain rate of 2 × 10−3 s−1, which means that the self-organized critical (SOC) behavior emerges with increasing strain rates.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions

In this paper, in order to study the flow behavior and elongation of as-cast ingots of SP-700 titanium alloy, hot tensile test was done in α/β dual phase and β single phase regions using strain rate of 0.1 s-1. Results showed that the hot tensile behavior of SP-700 in the α/β dual phase region (700-900 ºC) was different from the β single phase one (950-1100 ºC) due to the nature of alpha and be...

متن کامل

Microstructures and Crackling Noise of AlxNbTiMoV High Entropy Alloys

A series of high entropy alloys (HEAs), AlxNbTiMoV, was produced by a vacuum arc-melting method. Their microstructures and compressive mechanical behavior at room temperature were investigated. It has been found that a single solid-solution phase with a body-centered cubic (BCC) crystal structure forms in these alloys. Among these alloys, Al0.5NbTiMoV reaches the highest yield strength (1,625 M...

متن کامل

Dynamic ESPI system for spatio-temporal strain analysis of a deforming solid object

In Dynamic Electronic Speckle Pattern Interferometry (DESPI), deformation analysis could be done for successively acquired frame data of interfering speckle patterns with no additional frames like phase shifting speckle patterns. Our final goal is to obtain a temporally varying process of two-dimensional strain field. Two normal strains and shearing strain are derived by numerical derivatives o...

متن کامل

The balance between the MIR164A and CUC2 genes controls leaf margin serration in Arabidopsis.

CUP-SHAPED COTYLEDON1 (CUC1), CUC2, and CUC3 define the boundary domain around organs in the Arabidopsis thaliana meristem. CUC1 and CUC2 transcripts are targeted by a microRNA (miRNA), miR164, encoded by MIR164A, B, and C. We show that each MIR164 is transcribed to generate a large population of primary miRNAs of variable size with a locally conserved secondary structure around the pre-miRNA. ...

متن کامل

Experiments and Model for Serration Statistics in Low-Entropy, Medium-Entropy, and High-Entropy Alloys

High-entropy alloys (HEAs) are new alloys that contain five or more elements in roughly-equal proportion. We present new experiments and theory on the deformation behavior of HEAs under slow stretching (straining), and observe differences, compared to conventional alloys with fewer elements. For a specific range of temperatures and strain-rates, HEAs deform in a jerky way, with sudden slips tha...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016