Sound-producing sand in Japan: major element composition and its minerals determined by X-ray diffraction and X-ray fluorescence.
نویسندگان
چکیده
The major element composition, including two kinds of clay minerals and moisture content of sound-producing sand are reported for the first time. Sand from 33 beaches in Japan has been found to make sound. Ten sound-producing beaches were selected to compare with silent beach sand. Both sound-producing sand and silent beach sand are mostly composed of quartz and feldspar. The range of SiO2 content of sound-producing sand is not different from silent sand samples. This indicates that a high quartz content is not necessary to produce sound, although more than 60 weight percent of quartz is necessary. One silent sand recovered its sound after a 3.5 percent HNO3 treatment. Also, a small portion of clay minerals was found. A clean grain surface is a necessary factor for sand to produce sound. Illite was found in all silent sand samples.
منابع مشابه
Thermal Analysis: A Complementary Method to Study the Shurijeh Clay Minerals
Clay minerals are considered the most important components of clastic reservoir rock evaluation studies. The Shurijeh gas reservoir Formation, represented by shaly sandstones of the Late Jurassic-Early Cretaceous age, is the main reservoir rock in the Eastern Kopet-Dagh sedimentary Basin, NE Iran. In this study, X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopic (S...
متن کاملکانیشناسی کانسار روی و سرب برفکه، شمال غرب شاهرود (معرفی چند کانی کمیاب در این کانسار برای اولین بار)
The Barfakeh lead and zinc ore deposit is located 40km NW of Shahrood in the East Alborz techtonic zone. The rocks adjacent to this ore deposit include the Shemshak formation, which consists of shale and sandstone with the age in the upper Terias to Lias range, tuffs of the Karaj formation, and Conglomerates of the Fajan formation. The host rock of the ore deposit is the massive limestone of La...
متن کاملBeneficiation of a low-grade iron ore by combination of wet low-intensity magnetic separation and reverse flotation methods
Beneficiation of a low-grade iron ore was investigated by combination of the low-intensity magnetic separation and reverse flotation methods. The main constituents of the representative sample were 36.86% Fe, 8.1% FeO, 14.2% CaO, 13.6% SiO2, and 0.12% S based on the X-ray fluorescence, titration, and Leco analysis methods. The mineralogical studies by the X-ray diffraction, scanning electron mi...
متن کاملPERFORMANCE OF AB, ALLOYS FOR HYDROGEN STORAGE AND HYDRIDE ELECTRODES
Two types of hydride electxodes are potential candidates to replace the Cd elecsode in NilCd batteries, One is of the A type where A is a rare earth metal or mixture thereof, and B is the transition metal. The other is commonly referred to as A type. A , type alloys with partial substitution of the B element in A type hydride material (Ovonic) with Co, Mn, Al, and Fe were studied (A compo...
متن کاملSurface Hardness Measurment and Microstructural Characterisation of Steel by X-Ray Diffraction Profile Analysis
An X-ray diffraction line will broaden considerably when steels change into martensitic structure on quenching. The results presented in this paper show that X-ray diffraction technique can be employed for a rapid and nondestructive measurement of hardness of hardened steel. Measurement on various quenched and tempered steels showed that the breadth of its diffraction peak increased with increa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Analytical sciences : the international journal of the Japan Society for Analytical Chemistry
دوره 19 10 شماره
صفحات -
تاریخ انتشار 2003