Measurement of tortuosity in aluminum foams using airborne ultrasound.

نویسندگان

  • Lawrence H Le
  • Chan Zhang
  • Dean Ta
  • Edmond Lou
چکیده

The slow compressional wave in air-saturated aluminum foams was studied by means of ultrasonic transverse transmission method over a frequency range from 0.2 MHz to 0.8 MHz. The samples investigated have three different cell sizes or pores per inch (5, 10 and 20 ppi) and each size has three aluminum volume fractions (5%, 8% and 12% AVF). Phase velocities show minor dispersion at low frequencies but remain constant after 0.7 MHz. Pulse broadening and amplitude attenuation are obvious and increase with increasing ppi. Attenuation increases considerably with AVF for 20 ppi foams. Tortuosity ranges from 1.003 to 1.032 and increases with AVF and ppi. However, the increase of tortuosity with AVF is very small for 10 and 20 ppi samples.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation of Foaming and Deformation for Composite Aluminum Foams

In this study, at the first stage, the rupture criterion of bubbles wall in Aluminum metal foam liquid was investigated by using Lattice Boltzmann. The two phases modeling were accomplished by using a modified Shan-Chen model. This model was run for several bubbles in A356+3wt.%SiC melt system. Then, bubbles morphologies (virtual metallographic) for A356+3wt.%SiC foams were simulated. Results s...

متن کامل

Acoustic damping performance of aluminum nanocomposite foams with different additive of carbon nanotubes and comparison that with conventional rockwool (Research Article)

Open cell aluminum foams have good acoustic dampening properties. In this research, in order to improve the sound damping capacity of these foams, 0.9, 1.5 and 3wt% carbon nanotubes were added to the aluminum foam. Foams were produced by the space holder method in powder metallurgy. The results showed that Al-0.9wt%CNT nanocomposite foam had the highest average sound transmission loss in the fr...

متن کامل

Mechanical properties of a density-graded replicated aluminum foam

The compressive mechanical properties of uniform and density-graded Al-6061 foams, produced by replication of polymer foams, are measured. hile the uniform foam shows compressive behavior characteristic of conventional (uniform) metallic foams with a near constant plateau stress, he density-graded foam exhibits a smoothly rising plateau stress. This behavior is modeled using a simple series com...

متن کامل

Application of porous foams for size-selective measurements of airborne wheat allergen.

BACKGROUND Exposure to airborne wheat allergen is a well-known cause of bakers' allergy and asthma. Airborne wheat allergen can be measured by enzyme immunoassays (EIAs) in extracts of inhalable dust samples, but only limited knowledge is available on the size distribution of wheat allergen-carrying particles. Recently, a new sampling medium, porous polyurethane foam, has been introduced for th...

متن کامل

Effect of non-acoustic properties on the sound absorption of polyurethane foams

In this paper the influence of non-acoustic properties on the sound absorption coefficient of polyurethane foams as a porous medium is investigated. Biot’s equations with transfer matrix method, as the solution approach are employed to evaluate the sound absorption coefficient of selected polyurethane foams. The major issue is the dependency of non-acoustic properties on each other which makes ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Ultrasonics

دوره 50 1  شماره 

صفحات  -

تاریخ انتشار 2010