Channel assignment strategies for a high altitude platform spot-beam architecture
نویسندگان
چکیده
Channel assignment strategies for use with a high altitude platform, spot beam architecture are examined. A novel power roll-off approximation is derived to allow terrestrial simulation tools to be used, and simulation performance is compared with a theoretical lower bound derived from the Engset distribution. It is shown that the use of cell overlap considerably enhances the blocking probability performance, in addition to boosting flexibility.
منابع مشابه
High Altitude Platform Resource Management Strategies with improved Connection Admission Control
This paper develops several radio resource management strategies for a broadband multi-beam High Altitude Platform (HAP) architecture. These are based on fixed channel assignment at the HAP and distributed dynamic channel assignment at the user end of the link, allowing the inherent cell overlap to be exploited. It is shown that carrier to interference threshold checks at the HAP end of the lin...
متن کاملFairness in Channel Allocation in a High Altitude Platform Communication System exploiting Cellular Overlap
This paper develops a new channel assignment strategy for a broadband multi-beam High Altitude Platform (HAP) architecture that exploits cell overlap. This scheme delivers equal data rate capacity to users and the blocking probability seen by the users is independent of the area. Exploiting cell overlap reduces the overall levels of blocking and improves the capacity of the system. As users in ...
متن کاملD - 7 3 8 2 N 92 - 10119 Chapter 3 Antenna Beam Coverage Concepts
The strawman PASS design calls for the use of a CONUS beam for transmission between the supplier and the satellite and for fixed beams for transmission between the basic personal terminal (BPT) and the satellite. The satellite uses a 3m main reflector for transmission at 20 GHz and a 2m main reflector for reception at 30 GHz. The beamwidth of the reflector is 0.35°. To cover CONUS 142 fixed bea...
متن کاملCellular Network Optimization Using Multi Hop Dynamic Channel Assignment with Dynamic Channel Assignment Scheme
Rapid growth in telecom industry searching for new methods provide the better service to their customer here implementing proposes a multihop dynamic channel assignment (MDCA) scheme for time division multiple access (TDMA)-based multihop cellular networks. The proposed MDCA assigns channels are observed in ofdma system to the calls based on interference information in surrounding cells, provid...
متن کاملSimulation of Subcooled Flow Boiling Occurring in Internal Combustion Engine Water Jacket by Numerical Modeling in a Channel with Hot Spot
Boiling heat transfer always has been proposed as a solution for enhancing heat transfer between the fluid and solid surfaces. Subcooled flow boiling is one of the mechanisms that occur in Internal Combustion Engine water jacket in which high amounts of heat is transferred. In this research, it has been tried to simulate subcooled flow boiling in a geometry similar to coolant channel inside the...
متن کامل