Assembly Line Balancing and Sequencing
نویسندگان
چکیده
Assembly line balancing (ALB) and sequencing is an active area of optimization research in operations management. The concept of an assembly line (AL) came to the fact when the finished product is inclined to the perception of product modularity. Usually interchangeable parts of the final product are assembled in sequence using best possibly designed logistics in an AL. The initial stage of configuring and designing an AL was focused on cost efficient mass production of standardized products. This resulted in high specialization of labour and the corresponding learning effects. However, the recent trend gained the insight of the manufacturers of shifting the AL configuration to low volume assembly of customized products, mass customization. The strategic shift took effect due to the diversified customer needs along with the individualization of products. This eventually triggered the research on AL balancing and sequencing for customized products on the same line in an intermix scenario, which is characterized as mixed-model assembly line balancing (MMALB) and sequencing. The configuration planning of such ALs has acquired an important concern as high initial investment is allied with designing, installing and redesigning an AL. The research carried out in this manuscript aims to contribute to the problem domain of MMALB and sequencing. Balancing refers to objective depended workload balance of the assembly jobs to different workstations. Sequencing refers to find an optimal routing/job dispatching queue considering the demand scenario, available time slots and resources. Primary factors associated to this problem domain includes different assembly plans (e.g. mixed/batch/single model production), variations in processing workstations (e.g. manual/robotic/hybrid stations), physical line layouts (e.g. straight/parallel/U-shaped lines) and varied work transporting methods (e.g. conveyor/pallet-based). These factors are mostly plant specific and must be considered as the design pre-requisites for line balancing and sequencing. The contribution of this work is twofold. Firstly, a brief review of the problem domain of ALB and sequencing is presented. This includes systematic design approach of an AL and different performance and workstation related indexes which helps the line designer to identify plant specific design factors for line balancing, re-balancing and sequencing. Different heuristics and meta-heuristics based ALB solution strategies, classification of ALB problems, MMALB and sequencing are also addressed (section 2). Secondly, a logic and mathematical formulation based methodology for solving ALB problem is proposed (section 3), addressed to low volume product customization in shop
منابع مشابه
Solving a multi-objective mixed-model assembly line balancing and sequencing problem
This research addresses the mixed-model assembly line (MMAL) by considering various constraints. In MMALs, several types of products which their similarity is so high are made on an assembly line. As a consequence, it is possible to assemble and make several types of products simultaneously without spending any additional time. The proposed multi-objective model considers the balancing and sequ...
متن کامل‘BALANCING AND SEQUENCING’ VERSUS ‘ONLY BALANCING’ IN MIXED MODEL U-LINE ASSEMBLY SYSTEMS: AN ECONOMIC ANALYSIS
With the growth in customers’ demand diversification, mixed-model U-lines (MMUL) have acquired increasing importance in the area of assembly systems. There are generally two different approaches in the literature for balancing such systems. Some researchers believe that since the types of models can be very diverse, a balancing approach without simultaneously sequencing of models will not yield...
متن کاملGenetic and Memetic Algorithms for Sequencing a New JIT Mixed-Model Assembly Line
This paper presents a new mathematical programming model for the bi-criteria mixed-model assembly line balancing problem in a just-in-time (JIT) production system. There is a set of criteria to judge sequences of the product mix in terms of the effective utilization of the system. The primary goal of this model is to minimize the setup cost and the stoppage assembly line cost, simultaneously. B...
متن کاملOnline Distribution and Load Balancing Optimization Using the Robin Hood and Johnson Hybrid Algorithm
Proper planning of assembly lines is one of the production managers’ concerns at the tactical level so that it would be possible to use the machine capacity, reduce operating costs and deliver customer orders on time. The lack of an efficient method in balancing assembly line can create threatening problems for manufacturing organizations. The use of assembly line balancing methods cannot balan...
متن کاملAssembly line balancing to minimize balancing loss and system loss
Assembly Line production is one of the widely used basic principles in production system. The problem of Assembly Line Balancing deals with the distribution of activities among the workstations so that there will be maximum utilization of human resources and facilities without disturbing the work sequence. Research works reported in the literature mainly deals with minimization of idle time i.e...
متن کاملMulti-objective scheduling and assembly line balancing with resource constraint and cost uncertainty: A “box” set robust optimization
Assembly lines are flow-oriented production systems that are of great importance in the industrial production of standard, high-volume products and even more recently, they have become commonplace in producing low-volume custom products. The main goal of designers of these lines is to increase the efficiency of the system and therefore, the assembly line balancing to achieve an optimal system i...
متن کامل