Energy harvesting from cerebrospinal fluid pressure fluctuations for self-powered neural implants.
نویسندگان
چکیده
In this paper, a novel method to generate electrical energy by converting available mechanical energy from pressure fluctuations of the cerebrospinal fluid within lateral ventricles of the brain is presented. The generated electrical power can be supplied to the neural implants and either eliminate their battery need or extend the battery lifespan. A diaphragm type harvester comprised of piezoelectric material is utilized to convert the pressure fluctuations to electrical energy. The pressure fluctuations cause the diaphragm to bend, and the strained piezoelectric materials generate electricity. In the framework of this study, an energy harvesting structure having a diameter of 2.5 mm was designed and fabricated using microfabrication techniques. A 1:1 model of lateral ventricles was 3D-printed from raw MRI images to characterize the harvester. Experimental results show that a maximum power of 0.62 nW can be generated from the harvester under similar physical conditions in lateral ventricles which corresponds to energy density of 12.6 nW/cm2. Considering the available area within the lateral ventricles and the size of harvesters that can be built using microfabrication techniques it is possible to amplify to power up to 26 nW. As such, the idea of generating electrical energy by making use of pressure fluctuations within brain is demonstrated in this work via the 3D-printed model system.
منابع مشابه
A nanogenerator for energy harvesting from a rotating tire and its application as a self-powered pressure/speed sensor.
Harvesting unexploited energy in the living environment to power small electronic devices and systems is attracting increasing massive attention. [ 1–7 ] As the size of the devices has shrunk to the nanoor microscale, the power consumption also decreased to a modest level, i.e., the microwatts to milliwatts range. It is entirely possible to drive such a device by directly scavenging energy from...
متن کاملResonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester
The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...
متن کاملA Self-Powered Insole for Human Motion Recognition
Biomechanical energy harvesting is a feasible solution for powering wearable sensors by directly driving electronics or acting as wearable self-powered sensors. A wearable insole that not only can harvest energy from foot pressure during walking but also can serve as a self-powered human motion recognition sensor is reported. The insole is designed as a sandwich structure consisting of two wavy...
متن کاملEnergy Harvesting for Self-Powered Nanosystems
Address correspondence to [email protected] ABSTRACT In this article, an introduction is presented about the energy harvesting technologies that have potential for powering nanosystems. Our discussion mainly focuses on the approaches other than the well-known solar cell and thermoelectrics. We mainly introduce the piezoelectric nanogenerators developed using aligned ZnO nanowire arrays. This is...
متن کاملBiofuel Cell Based on Microscale Nanostructured Electrodes with Inductive Coupling to Rat Brain Neurons
Miniature, self-contained biodevices powered by biofuel cells may enable a new generation of implantable, wireless, minimally invasive neural interfaces for neurophysiological in vivo studies and for clinical applications. Here we report on the fabrication of a direct electron transfer based glucose/oxygen enzymatic fuel cell (EFC) from genuinely three-dimensional (3D) nanostructured microscale...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Biomedical microdevices
دوره 19 2 شماره
صفحات -
تاریخ انتشار 2017