Wake of a Rough Beam Wall Surface
نویسندگان
چکیده
We review and compare two models recently developed for the impedance calculation of a rough surface. Presented at the International Computational Accelerator Physics Conference (ICAP 98) Monterey, CA September 14{18, 1998 Work supported by Department of Energy contract DE{AC03{76SF00515. WAKE OF A ROUGH BEAM WALL SURFACE K. L. F. Bane and G. V. Stupakov SLAC, 2575 Sand Hill Road, Menlo Park, CA. 95014 USA
منابع مشابه
On the Mechanism of Surface Roughness Wake Field Excitation*
In the manufacturing process beam pipes acquire a structure on their inner walls with a roughness depth in the order of typically 0.5 μm rms. This surface structure is polarised by the beam and can be interpreted as an artificial dielectric. The thin dielectric layer model shows, that for rough tubes there is exactly one synchronous mode, the so called “rough tube mode” (normally in the THz reg...
متن کاملDeposition of Various Shapes Particles on a Rough Surface in Turbulent Flow
An experiment set-up is used to study wall deposition rate of particles on a rough surface in a turbulent channel flow. Deposition velocities for three classes of particles, namely, spherical glass particles, irregular shape polymer particles, and fibrous silicon particles are studied. The particle concentration at the test section was measured with the aid of an isokinetic probe in conjunction...
متن کاملSurface Roughness Study for the TESLA-FEL
This report summarizes the surface roughness wake eld study for the TESLA FEL transfer line and the undulator. At present di erent models have been developed by K.Bane [1], G.Stupakov [2], A.Novokhatski, M.Timm,T.Weiland [3] to study the e ect of a random surface roughness in a beam pipe, and by K.Bane, A.Novokhatski [4], G.Stupakov [5], M.Dohlus [6] to calculate the wake in beam pipes with per...
متن کاملImpedance of Beam Pipes with Smooth Shallow Corrugations
The beam impedance of monopole modes in a pipe with periodic, smooth and shallow corrugation has been calculated. The approach uses an orthogonal TM field expansion with Bessel functions and an impedance boundary condition, which takes into account resistive wall effects. The approach is valid for corrugations with period lengths larger, smaller and of the same order as the free space wavelengt...
متن کاملStudy Effect of Deformation Nanochannel Wall Roughness on The Water-Copper Nano-Fluids Poiseuille Flow Behavior
In the nanochannel flow behavior with respect to expand their applications in modern systems is of utmost importance. According to the results obtained in this study, the condition of nonslip on the wall of the nanochannel is not acceptable because in the nano dimensions, slip depends on different parameters including surface roughness. In this study, keeping the side area roughness, deformatio...
متن کامل