Effect of eccentricity of twist drill and candle stick drill on delamination in drilling composite materials
نویسندگان
چکیده
Drilling is the most frequently employed operation of secondary machining for fiber-reinforced materials owing to the need for structure joining. Delamination is one of the serious concerns during drilling. Practical experience shows that an eccentric twist drill or an eccentric candle stick drill can degrade the quality of the fiber reinforced material. Comprehensive delamination models for the delamination induced by an eccentric twist drill and an eccentric candle stick drill in the drilling of composite materials have been constructed in the present study. For an eccentric twist drill and an eccentric candle stick drill, the critical thrust force that will produce delamination decreases with increasing point eccentricity x. The results agree with industrial experience. The need for control of drill eccentricity during drill regrinding has been proved analytically by the proposed models. q 2004 Elsevier Ltd. All rights reserved.
منابع مشابه
Comprehensive analysis of delamination in drilling of composite materials with various drill bits
Beside the twist drill, the effects of various drill geometries were rarely discussed in analytical fashion. This study presents a comprehensive analysis of delamination in use of various drill types, such as saw drill, candle stick drill, core drill and step drill. In this analysis, the critical thrust force at the onset of delamination is predicted and compared with the twist drill. © 2003 El...
متن کاملEffects of special drill bits on drilling-induced delamination of composite materials
Drilling is the most frequently employed operation of secondary machining for fiber-reinforced materials owing to the need for joining structures. Delamination is among the serious concerns during drilling. Practical experience proves the advantage of using such special drills as saw drill, candle stick drill, core drill and step drill. The experimental investigation described in this paper exa...
متن کاملComputerized Tomography and C-scan for Measuring Drilling-Induced Delamination in Composite Material Using Twist Drill and Core Drill
Delamination is one of the most concern defects in drilling of composite material. Delamination depends on the factors such as feed rate, tool geometry and wear. The mechanics of drilling composite materials has been examined along with the quality of the hole and the effect of tool design parameters. The capacity of computerized tomography (CT) showing sample cross-section in a nondestructive ...
متن کاملTaguchi analysis of delamination associated with various drill bits in drilling of composite material
This paper presents a prediction and evaluation of delamination factor in use of twist drill, candle stick drill and saw drill. The approach is based on Taguchi’s method and the analysis of variance (ANOVA). An ultrasonic C-Scan to examine the delamination of carbon fiber-reinforced plastic (CFRP) laminate is used in this paper. The experiments were conducted to study the delamination factor un...
متن کاملThe effect of chisel length and associated pilot hole on delamination when drilling composite materials
Drilling-induced delamination often occurs both at the entrance and the exit of the workpiece during drilling of composite material. Investigators have studied analytically and experimentally that delamination in drilling can be correlated to the thrust force of the drill. With a pre-drilled pilot hole, the delamination can be reduced significantly. Early reference reported models of drilling-i...
متن کامل