Low Frequency Ripple Mitigation of the Fuel Cell Inverter System using a Controlled Buck Current Source – Part II: Nonlinear Control
نویسندگان
چکیده
This paper analyzes the possibility of using a nonlinear controller to mitigate the current ripple of an inverter system powered by a Polymer Electrolyte Membrane Fuel Cell (PEMFC) stack. Hybrid and fuel cell technologies need to be merged in Hybrid Power Sources (HPS) to assure high performance regarding the PEMFC energy efficiency and PEMFC life cycle. The nonlinear controller is designed based on inverse gain that gives a constant answer for all levels of current ripple. Its advantages will be showed in comparison with hysteretic current control technique (that was shown in part I). Finally, a fuzzy logic controller is proposed to design the nonlinear control law.
منابع مشابه
REDUCTION OF INVERTER OUTPUT CURRENT RIPPLE IN CONNECTION OF FUEL CELL TO THE POWER NETWORK
In this paper, a method is introduced which reduces the harmonicdistortion of the inverter output current, connecting the fuelcell to the AC load. Using FUZZY LOGIC-PI (FLPI), the controllingmethod is engaged in optimum tuning of the PI controllercoefficients of this converter. This converter has only one DC-ACboost inverter and simultaneously has the task of increasingvoltage level and generat...
متن کاملOperation and Control of Hybrid Fuel Cell/ Energy Storage Distributed Power Generation System during voltage Sag Conditions
This paper presents a control strategy for fuel cell/energy storage power generation system during voltage sag conditions. The hybrid DC power sources are connected to grid using power electronic converters include DC-DC converter and grid connected voltage source inverter. The power from hybrid power sources is controlled during voltage sag by designing of control strategy for DC-DC converter....
متن کاملOperation and Control of Hybrid Fuel Cell/ Energy Storage Distributed Power Generation System during voltage Sag Conditions
This paper presents a control strategy for fuel cell/energy storage power generation system during voltage sag conditions. The hybrid DC power sources are connected to grid using power electronic converters include DC-DC converter and grid connected voltage source inverter. The power from hybrid power sources is controlled during voltage sag by designing of control strategy for DC-DC converter....
متن کاملA New Structure of Buck-Boost Z-Source Converter Based on Z-H Converter
In this paper, a new structure for buck-boost Z-source converter based on Z-H topology is proposed. The proposed converter consists of two LC networks similar to the conventional Z-source and Z-H converters. One of the characteristics of the proposed structure is that, without any changing in its’ power circuit, it can be used in different conversions such as dc/dc, dc/ac and ac/ac. This unique...
متن کاملAnalysis of a High Efficiency Boost-Inverter with Back-up Battery Storage in Fuel Cell
This paper, proposes an analysis and design of a high efficiency boost-inverter with bidirectional back-up battery storage in fuel cell. When low-voltage unregulated fuel cell (FC) output is conditioned to generate AC power, two stages are required: a boost stage and an inversion one. In this paper, the boost-inverter topology that achieves both boosting and inversion functions in a single-stag...
متن کامل