A CAD-Oriented Modeling Approach of Frequency-Dependent Behavior of Substrate Noise Coupling for Mixed-Signal IC Design
نویسندگان
چکیده
A simple, efficient CAD-oriented equivalent circuit modeling approach of frequency-dependent behavior of substrate noise coupling is presented. It is shown that the substrate exhibits significant frequency-dependent characteristics for high frequency applications using epitaxial layers on a highly doped substrate. Using the proposed modeling approach, circuit topographies consisting of only ideal lumped circuit elements can be synthesized to accurately represent the frequency response using y-parameters. The proposed model is well-suited for use in standard circuit simulators. The extracted model is shown to be in good agreement with rigorous 3D device simulation results.
منابع مشابه
Modeling of Substrate Noise Impact on a Single-Ended Cascode LNA in a Lightly Doped Substrate (RESEARCH NOTE)
Substrate noise generated by digital circuits on mixed-signal ICs can disturb the sensitiveanalog/RF circuits, such as Low Noise Amplifier (LNA), sharing the same substrate. This paperinvestigates the adverse impact of the substrate noise on a high frequency cascode LNA laid out on alightly doped substrate. By studying the major noise coupling mechanisms, a new and efficientmodeling method is p...
متن کاملAn Efficient Technique for Substrate Coupling Parasitic Extraction with Application to RF/Microwave Spiral Inductors (RESEARCH NOTE)
This paper presents an efficient modeling method, based on the microstrip lines theory, for the coupling between a substrate backplane and a device contact. We derive simple closed-form formulas for rapid extraction of substrate parasitics. We use these formulas to model spiral inductors as important substrate-noise sources in mixed-signal systems. The proposed model is verified for the freque...
متن کاملModeling and Simulation of Substrate Noise in Mixed-Signal Circuits Applied to a Special VCO
The mixed-signal circuits with both analog and digital blocks on a single chip have wide applications in communication and RF circuits. Integrating these two blocks can cause serious problems especially in applications requiring fast digital circuits and high performance analog blocks. Fast switching in digital blocks generates a noise which can be introduced to analog circuits by the common su...
متن کاملEfficient and Accurate Modeling and Simulation Techniques for Substrate Coupling Analysis in Deep Submicron Mixed-Signal IC’s
Phase-locked loops (PLLs) are used in wireless receivers to implement a variety of functions, such as frequency synthesis, clock recovery, demodulation, and mixed-signal integrated circuits. Substrate coupling noise is a key problem in today’s large mixed-signal systems. Switching-noise generated by digital circuits can be coupled to sensitive analog circuits through the substrate, can degrade ...
متن کاملSubstrate Crosstalk Analysis in Mixed Signal CMOS Integrated Circuits
| Substrate crosstalk modeling and analysis techniques for a reliable SoC oriented mixed signal IC design are outlined. Substrate noise measurements by use of a source follower and a latched comparator clearly indicate that L di=dt and R i e ects on Vdd/Gnd wirings appear in the substrate. An experimental full chip substrate crosstalk veri cation system based on a macroscopic substrate noise mo...
متن کامل