Molecular tailoring of interfacial failure.
نویسندگان
چکیده
Self-assembled monolayers (SAMs) provide an enabling platform for molecular tailoring of the chemical and physical properties of an interface. In this work, we systematically vary SAM end-group functionality and quantify the corresponding effect on interfacial failure between a transfer printed gold (Au) film and a fused silica substrate. SAMs with four different end groups are investigated: 11-amino-undecyltriethoxysilane (ATES), dodecyltriethoxysilane (DTES), 11-bromo-undecyltrimethoxysilane (BrUTMS), and 11-mercapto-undecyltrimethoxysilane (MUTMS). In addition to these four end groups, mixed monolayers of increasing molar ratio of MUTMS to DTES in solution are investigated. The failure of each SAM-mediated interface is initiated by a noncontact laser-induced spallation method at strain rates in excess of 10(6) s(-1). By making multiple measurements at increasing stress amplitudes (controlled by the laser fluence), we measure interface strengths of 19 ± 1.7, 20 ± 1.3, 52 ± 5.4, and 80 ± 6.5 MPa for interfaces functionalized with ATES, DTES, BrUTMS, and MUTMS, respectively. The interface strength is effectively tuned between the low strength of DTES and the high strength of MUTMS by controlling the concentration of MUTMS in solution. X-ray photoelectron spectroscopy of the failed interfaces reveals the influence of end group functionality on molecular dissociation, which significantly alters the failure process.
منابع مشابه
A Study on Structure and Property of Special Sulfonated Petroleum as a Complicated Anionic Surfactant
Alkaline/surfactant/polymer (ASP) flooding has been extensively applied to enhancing oil recovery. As an oil displacement agent, pe1troleum sulfonate (PS) is widely used in ASP pilot experiments. It is very important to find a petroleum sulfonate with a high interfacial activity and low adsorption loss. Anionic surfactant petroleum sulfonate is synthesized in a single-tube film sulfonation reac...
متن کاملSurface reconstruction transition of metals induced by molecular adsorption
Two surface reconstruction patterns, strikingly different from the Au(111) intrinsic herringbone reconstruction, have been observed at the interfaces between Au(111) and the self-assembled monolayer of perylene or iron phthalocyanine by scanning tunneling microscopy (STM). These interfacial structures, elucidated by using the two-dimensional Frenkel-Kontorova model and density-functional theory...
متن کاملA study on the tailoring of interfacial shear strength between graphene and polymer by addressing defects in graphene
A molecular dynamics simulation study on the interfacial strengthening between defected graphene and polypropylene matrix is implemented. As intrinsic defects in single layer graphene, oxidation, Thrower-Stone-Wales(TSW) defect, and Adatom defect are considered. On the transversely isotropic nanocomposites unit cell embedding different defected graphene, transversely isotropic stress-strain rel...
متن کاملSurface Modification of Cellulose-based Materials for Tailoring of Interfacial Interactions
متن کامل
Resistance spot welding of AISI 201 stainless steel: The relationship between welding current, microstructure, mechanical properties and failure mode
In this paper, resistance spot welding process of AISI 201 stainless steel is studied experimentally. For this purpose, effect of welding current on quality of weld is investigated and relationships between welding current and fusion zone characteristics are examined. For determining mechanical properties such as maximum load and fracture mode, tensile - shear test of spot welds is performed. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Langmuir : the ACS journal of surfaces and colloids
دوره 30 37 شماره
صفحات -
تاریخ انتشار 2014