Confinement without boundaries: anisotropic diffusion on the surface of a cylinder.
نویسندگان
چکیده
Densely packed systems of thermal particles in curved geometries are frequently encountered in biological and microfluidic systems. In 2D systems, at sufficiently high surface coverage, diffusive motion is widely known to be strongly affected by physical confinement, e.g., by the walls. In this work, we explore the effects of confinement by shape, not rigid boundaries, on the diffusion of discs by confining them to the surface of a cylinder. We find that both the magnitude and the directionality of lateral diffusion is strongly influenced by the radius of the cylinder. An anisotropy between diffusion in the longitudinal and circumferential direction of the cylinder develops. We demonstrate that the origin of this effect lies in the fact that screw-like packings of mono- and oligodisperse discs on the surface of a cylinder induce preferential collective motions in the circumferential direction, but also show that even in polydisperse systems lacking such order an intrinsic finite size confinement effect increases diffusivity in the circumferential direction.
منابع مشابه
Anisotropy Induced by Macroscopic Boundaries: Surface Normal Mapping Using DWI
INTRODUCTION Diffusion imaging has traditionally been used to infer information regarding tissue microstructure when the characteristic dimensions of the underlying geometry are smaller than the voxel size. However, the diffusion signal is sensitive to structures whose sizes are comparable to or greater than the voxels of the image. In this work, using a simple system of infinite parallel plane...
متن کاملOn Analysis of Stress Concentration in Curvilinear Anisotropic Deformable Continuum Bodies
In cylindrical continua, hoop stresses are induced due to the circumferential failure. This mainly happens when the cylinder is subjected to mechanical loads which vary in the circumferential directions. On the other hand, radial stress is stress in the direction of or opposite to the central axis of a cylindrical body. In the present study, the influence of curvilinear anisotropy on the radial...
متن کاملInvestigation and Simulation of the Effects of Dispersion and Transmittance angles on the Solar Cells Quantum Efficiency
In this paper the effects of transmittance, dispersion angle and diffusion length on the quantum efficiency of solar cells (QESC) have been simulated and investigated. Optical path technic is used for simulation. The results show that base thickness, diffusion length, dispersion angle, number of optical confinement path and transmission angles have an extremely effects on the QESC. Simulation r...
متن کاملSimulating Thin Sheets: Buckling, Wrinkling, Folding and Growth
Numerical simulations of thin sheets undergoing large deformations are computationally challenging. Depending on the scenario, they may spontaneously buckle, wrinkle, fold, or crumple. Nature’s thin tissues often experience significant anisotropic growth, which can act as the driving force for such instabilities. We use a recently developed finite element model to simulate the rich variety of n...
متن کاملSemi-analytical Solution for Time-dependent Creep Analysis of Rotating Cylinders Made of Anisotropic Exponentially Graded Material (EGM)
In the present paper, time dependent creep behavior of hollow circular rotating cylinders made of exponentially graded material (EGM) is investigated. Loading is composed of an internal pressure, a distributed temperature field due to steady state heat conduction with convective boundary condition and a centrifugal body force. All the material properties are assumed to be exponentially graded a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Soft matter
دوره 11 6 شماره
صفحات -
تاریخ انتشار 2015