Colour mixing LEDs with short microsphere doped acrylic rods.

نویسندگان

  • Chris Deller
  • Geoff Smith
  • Jim Franklin
چکیده

The output colour distributions from red, green and blue (RGB) LEDs mixed with cross linked PMMA micro particle doped PMMA mixing rods is compared to output from a plain PMMA mixing rod. Distinctive patterns with clear colour separation result with the undoped rod. These are homogenised by our mixers, resulting in white light. Light output has been photographed, measured and computer simulated at a distance of 10 cm from the output end of the rods.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Improving the Performance of Mixed-Color White LED Systems by Using Scattered Photon Extraction Technique

One of the methods for creating white light with light-emitting diodes (LEDs) is mixing radiations from several different colored LEDs. Mixed-color LEDs are expected to have greater luminous efficacy because they do not undergo downconversion losses like phosphor-converted white LEDs. However, in reality mixed-color LED systems require extra optical elements to reduce spatial color variation an...

متن کامل

Demonstration of an erbium-doped microsphere laser on a silicon chip

We demonstrate a low-threshold microsphere laser on a silicon chip, fabricated from erbium-doped silica sol–gel film. Single-longitudinal mode lasing emission is observed from a 37 μm diameter microsphere cavity with an erbium ion concentration of 2× 1019 cm−3. The measured lasing threshold of the silica microsphere laser is as low as 4.8 μW. (Some figures may appear in colour only in the onlin...

متن کامل

Resonant cavity effect optimization of III-nitride thin-film flip-chip light-emitting diodes with microsphere arrays.

Comprehensive studies were carried out to investigate the light extraction efficiency of thin-film flip-chip (TFFC) light-emitting diodes (LEDs) with anatase TiO(2) microsphere arrays by employing the finite-difference time-domain method. The quantum well position and the resonant cavity effect were studied to obtain optimum light extraction for the planar TFFC LED. Further enhancement in light...

متن کامل

Electroresponsive Acrylic Gels

This articles is comprised of two parts: a) an experimental investigation on the behavior of an acrylic gel under DC electric field and b) a physico - mathematical description.a) Gel rods made of poly [acrylamide-co-bisacrylamide] were partially hydrolyzed to different extents at pH 12 by teteramethylethylene diamine. Equlibrium properties of the resulting gels rods (water content,...

متن کامل

Luminescence and luminescence quenching of highly efficient Y2Mo4O15:Eu3+ phosphors and ceramics

A good LED phosphor must possess strong enough absorption, high quantum yields, colour purity, and quenching temperatures. Our synthesized Y2Mo4O15:Eu(3+) phosphors possess all of these properties. Excitation of these materials with near-UV or blue radiation yields bright red emission and the colour coordinates are relatively stable upon temperature increase. Furthermore, samples doped with 50%...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics express

دوره 12 15  شماره 

صفحات  -

تاریخ انتشار 2004