Composite Structures - NDE/Structures Health Monitoring
ثبت نشده
چکیده
DOD SBIR Phase II Company Name Title Quad Chart NTTC Taxonomy TEXAS RESEARCH INSTITUTE AUSTIN, INC. 9063 Bee Caves Road Austin, TX 78733-6201 Advanced Prognostic Health Management Technologies Using Integrated Detection Techniques with Physics of Failure Mode The proportion of fatigue life that is expended during fatigue crack nucleation is significant in the materials and loading typical of aircraft structural components. The ability to measure or compute the time for fatigue damage to nucleate active fatigue cracks allows the enhanced service usage of individual aircraft components, on-condition based maintenance, and flexibility in inspection/maintenance/repair scheduling. TRI/Austin and AP/ES Inc. are developing of a structural prognostics and health management system that combines local measurements of properties of interest with the capability to model crack nucleation and growth, all integrated within a miniaturized onboard system weighing only a few pounds. The TRI team?s approach is to combine multiple sensor technologies with proven physics-based modeling on a self-contained system for a complete health assessment and prognostic capability. The TRI team combines the TRI experience in developing nondestructive inspection technologies suitable for miniaturization on TRI?s LAHMP? family of PHM systems with the AP/ES capability in structural modeling and prediction. Information Systems Data Acquisition
منابع مشابه
Embedded Non-destructive Evaluation for Structural Health Monitoring, Damage Detection, and Failure Prevention
In this paper we review the state of the art in an emerging new technology: embedded ultrasonic non-destructive evaluation (NDE). Embedded ultrasonic NDE permits active structural health monitoring, i.e. the on-demand interrogation of the structure to determine its current state of structural health. The enabling element of embedded ultrasonic NDE is the piezoelectric wafer active sensor (PWAS)...
متن کاملHealth Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type
Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...
متن کاملMarine Composites Non-Destructive Evaluation
An increasing number of marine structures are utilizing composite materials. Major structure and components can be built lighter and corrosion-resistant using composite construction. The recreational boating industry has long recognized this and now commercial ferries are increasingly realizing fuel savings through weight reduction. The US Navy’s DDG-1000 topside structure and LPD-17 advanced e...
متن کاملLamb-wave Embedded Nde with Piezoelectric Wafer Active Sensors for Structural Health Monitoring of Thin-wall Structures
Piezoelectric wafer active sensors (PWAS) are inexpensive, non-intrusive, unobtrusive devices that can be surface-mounted on existing structures or inserted between the layers of new composite structures. The PWAS can be used in both active and passive modes. PWAS generate and detect Lamb waves and enable the development of embedded NDE concepts. This paper will present two embedded NDE concept...
متن کاملRecent Advancements in the Electro-Mechanical (E/M) Impedance Method for Structural Health Monitoring and NDE
The emerging electro-mechanical impedance technology has high potential for in-situ health monitoring and NDE of structural systems and complex machinery. At first, the fundamental principles of the electro-mechanical impedance method are briefly reviewed and ways for practical implementation are highlighted. The equations of piezo-electric material response are given, and the coupled electro-m...
متن کاملUltrasonic nondestructive inspection of solid objects
Ultrasonic testing (UT) has been used for nondestructive evaluation (NDE) of materials for more than half a century. A number of NDE techniques have been developed and specifi standards have been created for the UT applications in different areas of engineering. UT has two main goals related to inspection of solid objects, firstl , detection and characterization of material discontinuities (fl ...
متن کامل