Improved Output ESD Protection By Dynamic Gate Floating Design - Electron Devices, IEEE Transactions on
نویسندگان
چکیده
A dynamic gate floating design is proposed to improve ESD robustness of the CMOS output buffers with small drive capability. By using this novel design, the human-body-model (machine-model) ESD failure threshold of a 2-mA CMOS output buffer has been practically improved from 1 KV (100 V) to greater than 8 KV (1500 V) in a 0.35m CMOS process.
منابع مشابه
A floating gate design for electrostatic discharge protection circuits
In this paper, a circuit design method for electrostatic discharge (ESD) protection is presented. It considers the gate floating state for ESD protection and negatively gate biased for leakage suppression under normal operations. The circuit is achieved by adding a switch device and a negatively biased circuit at the gate of ESD protection devices. Robustness and leakage of ESD protection circu...
متن کاملSubstrate-Triggered Technique for On-Chip ESD Protection Design in a 0.18- m Salicided CMOS Process
The substrate-triggered technique for input, output, and power-rail electrostatic discharge (ESD) protection, as comparing to the traditional gate-driven technique, has been proposed to effectively improve ESD robustness of IC products. With the substrate-triggered technique, on-chip ESD protection circuits for the input, output, and power pins have been designed and verified in a 0.18m salicid...
متن کاملArea-Efficient Layout Design for CMOS Output Transistors - Electron Devices, IEEE Transactions on
A novel layout design to effectively reduce the layout area of the thin-oxide NMOS and PMOS devices in CMOS output buffers with ESD consideration is proposed. With respect to the traditional finger-type layout, the large-dimension output NMOS and PMOS devices are realized by multiple octagonal cells. Without using extra ESD-optimization process, the output NMOS and PMOS devices in this octagon-...
متن کاملCapacitor-couple ESD protection circuit for deep-submicron low-voltage CMOS ASIC
Capacitor-couple technique used to lower snapbacktrigger voltage and to ensure uniform ESD current distribution in deep-submicron CMOS on-chip ESD protection circuit is proposed. The coupling capacitor is realized by a poly layer right under the wire-bonding metal pad without increasing extra layout area to the pad. A timing-original design model has been derived to calculate the capacitor-coup...
متن کاملESD Protection Strategy for Sub-Quarter-Micron CMOS Technology : Gate-driven Design Versus Substrate-triggered Design
The operation principles of gate-driven design and substratetriggered design for ESD (ElectroStatic Discharge) protection are first explained by energy-band diagrams in this paper. The onchip ESD protection devices realized in 0.18-μm and 0.35-μm CMOS processes are used to verify the efficiency of gate-driven or substrate-triggered designs. The substrate-triggered design can effectively and con...
متن کامل