Fabrication Processes for Magnetic Microactuators with Polysilicon Flexures
نویسندگان
چکیده
Electroplated magnetic films have been integrated with silicon-based surface micromachining to fabricate magnetically actuated microflexure structures. Both the “frame-plating” technique and also a less complex onemask plating process have been used to electrodeposit NiFe onto polysilicon flexures coated with Cr-Cu seed layers. The microactuators are released by removing the underlying sacrificial layer in a hydrofluoric-acid etch. The microactuators described in this paper are potentially useful in microphotonic systems as well as other applications.
منابع مشابه
Design and Fabrication of an Angular Microactuator for Magnetic Disk Drives
Angular electrostatic microactuators suitable for use in a two-stage servo system for magnetic disk drives have been fabricated from molded chemical-vapor-deposited (CVD) polysilicon using the HexSil process. A 2.6-mm-diameter device has been shown to be capable of positioning the read/write elements of a 30% picoslider over a 1m range, with a predicted bandwidth of 2 kHz. The structures are fo...
متن کاملMagnetic Microactuation of Torsional Polysilicon Structures
A microactuator technology utilizing magnetic thin films and polysilicon flexures is applied to torsional micro-structures. These structures are constructed in a batch-fabrication process that combines electroplating with conventional IC-lithography, materials, and equipment. A microactuated mirror made from a 430x130x15 µm 3 nickel-iron plate attached to a pair of 400x2.2x2.2 µm 3 polysilicon ...
متن کاملMagnetic Microactuation of Polysilicon Flexure Structures
— A microactuator technology that combines magnetic thin films with polysilicon flexural structures is described. Devices are constructed in a batch-fabrication process that combines electroplating with conventional lithography, materials, and equipment. A microactuator consisting of a 400x(47-40)x7 µm 3 rectangular plate of NiFe attached to a 400x(0.9-1.4)x2.25 µm 3 polysilicon cantilever beam...
متن کاملMicroactuators Systems of Torsion Silicon Cantilever
Magnetic microactuation systems of torsion silicon cantilever is described. Devices are constructed in a batch fabrication process which combines electroplating with conventional photolithography , materials, and equipment. The magnetic transducers are applied to generation of motion in micromechanical structures such as cantilever, beam, membrane. Microelectromechanical systems (MEMS) with mag...
متن کاملApplication of polyimide to bending-mode microactuators with Ni/Fe and Fe/Pt magnet
Out-of-plane polyimide (PI) electromagnetic microactuators with different geometries are designed, fabricated and tested. Fabrication of the electromagnetic microactuators consists of 10 lm thick Ni/Fe (80/20) permalloy deposition on PI diaphragm by electroplating process, electroplating of copper planar coil with 10 lm thick, bulk micromachining, and excimer laser selective ablation. They are ...
متن کامل