The transition from inertial to viscous flow in capillary rise.

نویسندگان

  • N Fries
  • M Dreyer
چکیده

We investigate the initial moments of capillary rise of liquids in a tube. In this period both inertia and viscous flow losses balance the pressure generated by the meniscus curvature (capillary pressure). It is known that the very first stage is purely dominated by inertial forces, where subsequently the influence of viscosity increases (visco-inertial flow). Finally the effect of inertia vanishes and the flow becomes purely viscous. In this study we derive the times and meniscus heights at which the transition between the time periods occur. This is done in an attempt to provide a method to determine a priori which terms of the momentum balance are relevant for a given problem. Analytic solutions known from previous literature are discussed and the time intervals of their validity compared. The predicted transition times and the calculated heights show good agreement with experimental results from literature. The results are also discussed in dimensionless form and the limitations of the calculations are pointed out.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Plethora of transitions during breakup of liquid filaments.

Thinning and breakup of liquid filaments are central to dripping of leaky faucets, inkjet drop formation, and raindrop fragmentation. As the filament radius decreases, curvature and capillary pressure, both inversely proportional to radius, increase and fluid is expelled with increasing velocity from the neck. As the neck radius vanishes, the governing equations become singular and the filament...

متن کامل

Chapter II

Two-phase flow through capillary channels is considerably different from two-phase flow through larger channels: viscous (μu/d) and interfacial (γ/d) stresses, both inversely proportional to the diameter, are more important than inertial (ρu) and gravitational (ρgH) stresses. A reasonable definition of the term capillary might be obtained by requiring the dominance of surface tension forces ove...

متن کامل

Positive Coupling Effect in Gas Condensate Flow Capillary Number Versus Weber Number

Positive coupling effect in gas condensate reservoirs is assessed through a pure theoretical approach. A combination of linear stability analysis and long bubble approximation is applied to describe gas condensate coupled flow and relative permeability, thereof. The role of capillary number in gas condensate flow is clearly expressed through closed formula for relative permeability. While the m...

متن کامل

Non-Darcian Mixed Convection Flow in Vertical Composite Channels with Hybrid Boundary Conditions

In this article, the effects of viscous dissipation and inertial force on the velocity and temperature distributions of the mixed convection laminar flow in a vertical channel partly filled with a saturated porous medium have been studied. In this regard, the Brinkman–Forchheimer extended Darcy model was adopted for the fluid flow in the porous region. In addition, three different viscous dissi...

متن کامل

Modelling of the moving deformed triple contact line: influence of the fluid inertia

For partial wetting, motion of the triple liquid-gas-solid contact line is influenced by heterogeneities of the solid surface. This influence can be strong in the case of inertial (e.g. oscillation) flows where the line can be pinned or move intermittently. A model that takes into account both surface defects and fluid inertia is proposed. The viscous dissipation in the bulk of the fluid is ass...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Journal of colloid and interface science

دوره 327 1  شماره 

صفحات  -

تاریخ انتشار 2008