Review of Wide Bandwidth Low Power Low NOISE Amplifier for Modern Wireless Communication
نویسندگان
چکیده
Recently, Low noise amplifier versatile used in modern wireless communication like Wi-Max, WLAN, GSM, Bluetooth and satellite communication. Low Noise amplifier have important feature like amplify the signal with rejection of noise. Low noise amplifier in modern communication used as filter with amplifier. In recent scenario low noise amplifier available in wide band, single band, multi-band frequency of application. In present days low noise amplifier the also reduces the reflection of signal exist by elements and connecting interface inside the amplifier. Low noise amplifier available with high gain, noise rejection and with less power consumption. In this paper review the work of past decades done in low noise amplifier. Low Noise Amplifier (LNA) is versatile used as a broadband mixer, low noise amplifier, power amplifier and Darlington amplifier, active balunes, multiband amplifier. Today technology required high speed of transmission efficiency with small power consumption and less utilization of elements in proposed amplifier, Low Noise Amplifier (LNA) products full fill all requirement of modern wireless communications, so that review and discussion, future requirement of technology is needed to discuss. In this paper discusses issues of low noise amplifier, its
منابع مشابه
A New Ultra-Wideband Low Noise Amplifier With Continuous Gain Control
This paper presents a new variable gain low noise amplifier (VG-LNA) for ultra-wideband (UWB) applications. The proposed VG-LNA uses a common-source (CS) with a shunt-shunt active feedback as an input stage to realize input matching and partial noise cancelling. An output stage consists of a gain-boosted CS cascode and a gain control circuit that moves the high resonant frequency to higher freq...
متن کاملA Novel Resistive Capacitive Feedback Trans-impedance Amplifier Optimization Using IPSO Algorithm
A novel low noise trans-impedance amplifier is proposed using low cost 0.18 µm CMOS technology. A resistive-capacitive feedback is used to extend the bandwidth of the amplifier. As the structure is inductor less, it is suitable for low cost integrated optical interconnects. In this paper Improved Particle Swarm Optimization have applied to determine optimal trans-resistance and noise of propose...
متن کاملAnalyzing the Effect Adding an Active Feedback Network with an Inductive behavior to a Common-Gate Topology as a Transimpedance Amplifier for Low-Power and Wide-Band Communication Applications
Common Gate (CG) topologies are commonly used as the first stage in Transimpedance Amplifiers (TIA), due to their low input resistance. But, this structure is not solely used as a TIA and comes with other topologies such as differential amplifiers or negative resistances and capacitances. This paper deals with analyzing the effect of adding an active feedback network to a common gate topology...
متن کاملAnalysis and design of a CMOS current reused cascaded distributed amplifier with optimum noise performance
In this paper, analysis, simulation and design of a distributed amplifier (DA) with 0.13µm CMOS technology in the frequency range of 3-40 GHz is presented. Gain cell is a current reused circuit which is optimum in gain, noise figure, bandwidth and also power dissipation. To improve the noise performance in the frequency range of interest, a T-matching low pass filter LC network which is utilize...
متن کاملStudy and Analysis of A Simple Self Cascode Regulated Cascode Amplifier
This article proposed a simple self cascode RGC amplifier configuration to increase the gain and bandwidth. The cascode amplifier eliminates the miller capacitance between input and output and facilitates high gain, high input and output impedance with high bandwidth. However, the cascode amplifier requires relatively high supply voltage for proper operation and it decreases the output voltage ...
متن کامل