Section I

ثبت نشده
چکیده

Bovine diarrhea virus (BVDV) causes a variety of economically important enteric and infertility problems. For that reason, several countries have eradicated the disease and some others have schemes in progress to achieve freedom from it. Although there is a considerable amount of information about the risk of BVDV transmission through contaminated semen used for AI, there is no available evidence to indicate whether the resulting embryos, when used for embryo transfer (ET), can lead to the transmission of BVDV to recipients and offspring. For this experiment, semen from a bull persistently infected with BVDV (10 TCID50/mL of NY strain) was used for insemination (2 times at estrus) of BVDV-seronegative, superovulated heifers (n = 27).All heifers seroconverted to BVDV within 10 days post-insemination. Embryos and unfertilized oocytes were collected nonsurgically (n = 92) or postmortem (n = 52) 7 days post-insemination and were either washed according to IETS recommendations (without trypsin treatment) or left unwashed. In total, out of 144 unfertilized oocytes and embryos collected, 23 (16%) were of ET quality. Most of the embryos were degenerated or unfertilized. On 17 occasions, 1 or 2 washed embryos were transferred to BVDV-seronegative recipients. After ET, all pregnant and nonpregnant recipients remained free of BVDV and antibodies. In total, 6 heifers became pregnant and 5 calves free of BVDV and BVDV antibodies, including 2 sets of twins, have been born to date. Post-insemination, BVDV was detected in 29% (12/41) of unwashed and 10% (4/40) of washed embryos, 100% (4/4) of follicular fluid samples, oviductal epithelial cells, endometrium, and corpora lutea tissues as determined by the virus isolation test. Results herein suggest that BVDV can be transmitted by AI, resulting in the production of some proportion of contaminated embryos. However, it appears that such embryos, when washed according to the IETS guidelines, do not cause BVDV transmission to recipients or their offspring.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

ANALYTICAL STUDY OF STEEL I-BEAM WITH STEPPED FLANGES

This paper presents a parametric study of steel I- beam with stepped flanges by using finite element analysis. Stepped flange beam is used in structures to decrease the negative bending moments near interior supports that causes failure due to buckling. Steps in the cross section can be achieved by adding cover plates to the beam flanges, changing the size of the hot rolled section, or changing...

متن کامل

The Effect of the Slot Length on Beam Vertical Shear in I-Beams with Moment Connections

This paper evaluates the effect of slot existence with limited length between flanges and web junction of I-shaped beams at the region of moment connections on vertical force and shear stress distribution in beam flanges and web at connection section in comparison with classical theory of stress distribution. The main purpose of this research is to evaluate the efficiency of the slot in connect...

متن کامل

Flexural-torsional stability of sandwich tapered I-beams with a functionally graded porous core

The present research deals with the flexural-torsional buckling analysis of sandwich web and/or flanges tapered doubly-symmetric I-beam. All section walls are composed of two metal face layers and a functionally graded (FG) porous core. It is assumed that the material properties of the porous core vary gradually in the longitudinal direction according to the simple power-law function considerin...

متن کامل

Effective factors to select cesarean-section

Background:  A significant increase in cesarean section in worldwide is known as one of the health system problems. The WHO has estimated that cesarean section in recent years has been 10% in all countries. Despite the increasing popularity of cesarean section, the literature lacks insights about factors affecting the selection of this delivery method. In this vein, this study investigates the ...

متن کامل

CuO/water Nanofluid Convective Heat Transfer Through Square Duct Under Uniform Heat Flux

Sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. But square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

متن کامل

Explicit Stiffness of Tapered and Monosymmetric i Beam-Columns

A formulation for finite element analysis of tapered and  monosymmetric I shaped beam-columns is presented. This is a general way to analyze these types of complex elements. Based upon the formulation, member stiffness matrix is obtained explicitly. The element considered has seven nodal degrees of freedom. In addition, the related stability matrix is found. Numerical studies of the aforementio...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010