Design of Low Power Cmos Logic Circuits Using Gate Diffusion Input (gdi) Technique
نویسندگان
چکیده
The Gate diffusion input (GDI) is a novel technique for low power digital circuit design. This technique reduces the power dissipation, propagation delay, area of digital circuits and it maintains low complexity of logic design. In this paper, the 4×1 Multiplexer, 8×3 Encoder, BCD Counter and Mealy State Machine were implemented by using Pass Transistors (PT), Transmission Gate (TG) and Gate Diffusion Input (GDI) technique and then they were compared with each other for power dissipation. The Multiplexers and Encoders are combinational circuits and Counters and mealy machines are sequential circuits both of them are very important digital systems so power optimization should be done to those digital circuits. The whole processes for development of digital circuits and simulation was done by using the mentor graphics backend tool. This method can also be extended to the processors and other high level designs for optimization of power dissipation, area and delay in order to increase the circuit efficiency.
منابع مشابه
Design of Low voltage, Low Power and High Speed Logic Gates Using Modified GDI Technique
In low-voltage and low-power applications, optimization of several devices for speed and power is a significant issue. These issues can be overcome by incorporating Modified Gate Diffusion Input (Mod-GDI) technique. This technique has been adopted from Gate Diffusion Input (GDI). The Mod-GDI technique allows reducing power consumption, delay and area of digital circuits, while maintaining low c...
متن کاملDesign of Power-Efficient Digital Circuits Using Gate-Diffusion Input (GDI) Technique in CMOS Process
in this paper Gate diffusion input (GDI) technique of Low-power digital circuit design is described and verified in 0.18μm CMOS process. This technique permits reducing power consumption, propagation delay, and area of digital circuits of logic design. Performance comparison with traditional CMOS and pass-transistor logic design techniques is presented. These methods are compared with respect t...
متن کاملImplementation of 1-bit Full Adder using Gate Difuision Input (GDI) cell
Now–a-days in digital circuits design high speed, high throughput, small silicon area, and at the same time, lowpower consumption of digital circuit is most important things for digital circuit designers. In this paper a novel design method of a low power digital circuit is discussed, where the GATE DIFFUSION INPUT (GDI) technique has been used for the simultaneous generation of digital logic f...
متن کاملLow Power Circuits using Modified Gate Diffusion Input ( GDI )
Gate Diffusion Input (GDI) is a technique for designing low power circuits. This technique allows usage of less number of transistors as compared to CMOS logic. The basic GDI cell consists of only two transistors which are used to implement the basic logic functions. Because of less number of transistors, the switching is reduced and hence there will be a less power, delay and also reduced area...
متن کاملSimulation Analysis and Characterization of Low Power and High-Speed Digital Circuits
Power consumption and delay are two important considerations for VLSI systems which depend on various critical design parameters. The objective of this project is to reduce the power and to reduce the delay which increases the speed. The purpose of this paper is the design and implementation of an Arithmetic Logic Unit (ALU) using area optimizing techniques such as Gate Diffusion Input (GDI). I...
متن کامل