Research on Rolling Bearing Fault Diagnosis with Adaptive Frequency Selection based on LabVIEW
نویسندگان
چکیده
In order to study the on-line fault monitoring and diagnosing for the rolling bearing this paper proposes a resonant demodulation measurement with an adaptive frequency selection based on LabVIEW. The wavelet packet function is used to decompose and reconstruct the measured vibration signal to extract the fault information accurately under the noise background. The kurtosis value of the signal within the range of all frequency bands is calculated and compared automatically to select a resonance frequency band containing the fault frequency. The fault frequency can be extracted by using the resonance demodulation and then the fault element can be identified. The experimental results show that the fault diagnosis result is the same as the fault simulation of the rolling bearing inner ring on the test bench.
منابع مشابه
Rolling Bearing Fault Analysis by Interpolating Windowed DFT Algorithm
This paper focuses on the problem of accurate Fault Characteristic Frequency (FCF) estimation of rolling bearing. Teager-Kaiser Energy Operator (TKEO) demodulation has been applied widely to rolling bearing fault detection. FCF can be extracted from vibration signals, which is pre-treatment by TEKO demodulation method. However, because of strong noise background of fault vibration signal, it is...
متن کاملA Novel Intelligent Fault Diagnosis Approach for Critical Rotating Machinery in the Time-frequency Domain
The rotating machinery is a common class of machinery in the industry. The root cause of faults in the rotating machinery is often faulty rolling element bearings. This paper presents a novel technique using artificial neural network learning for automated diagnosis of localized faults in rolling element bearings. The inputs of this technique are a number of features (harmmean and median), whic...
متن کاملA DWT and SVM based method for rolling element bearing fault diagnosis and its comparison with Artificial Neural Networks
A classification technique using Support Vector Machine (SVM) classifier for detection of rolling element bearing fault is presented here. The SVM was fed from features that were extracted from of vibration signals obtained from experimental setup consisting of rotating driveline that was mounted on rolling element bearings which were run in normal and with artificially faults induced conditio...
متن کاملStudy on A Fault Diagnosis Method of Rolling Element Bearing Based on Improved ACO and SVM Model
The vibration signal is nonstationary and it is difficult to acquire the sample with typical fault. An improved ACO algorithm based on adaptive control parameters is introduced into SVM model to propose a new fault diagnosis (IMASFD) method in this paper. In the IMASFD method, the EMD method is used to decompose fault vibration signal into IMF components, the energy of IMF components is selecte...
متن کاملBearing Fault Detection Based on Maximum Likelihood Estimation and Optimized ANN Using the Bees Algorithm
Rotating machinery is the most common machinery in industry. The root of the faults in rotating machinery is often faulty rolling element bearings. This paper presents a technique using optimized artificial neural network by the Bees Algorithm for automated diagnosis of localized faults in rolling element bearings. The inputs of this technique are a number of features (maximum likelihood estima...
متن کامل