Digital Background Calibration of an Algorithmic Analog-to-Digital Converter Using a Simplified Queue
نویسندگان
چکیده
An analog queue-based architecture and an adaptive digital-calibration algorithm calibrate an 8-bit two-stage pipelined algorithmic analog-to-digital converter (ADC). To minimize power dissipation and noise, the queue consists of only one sample-and-hold amplifier. At a sampling rate of 20 Msamples/s, the peak signal-to-noise-and-distortion ratio (SNDR) is 45 dB, and the spurious-free dynamic range (SFDR) is 62 dB. The total power dissipation is 25.4 mW from 3.0 V. The active analog area is 0.11 mm. Index Terms – Adaptive systems, analog-digital conversion, calibration, CMOS analog integrated circuits.
منابع مشابه
Optimal fast digital error correction method of pipelined analog to digital converter with DLMS algorithm
In this paper, convergence rate of digital error correction algorithm in correction of capacitor mismatch error and finite and nonlinear gain of Op-Amp has increased significantly by the use of DLMS, an evolutionary search algorithm. To this end, a 16-bit pipelined analog to digital converter was modeled. The obtained digital model is a FIR filter with 16 adjustable weights. To adjust weights o...
متن کاملDesigning an Integrated All-Optical Analog to Digital Converter
We present the procedure for designing a high speed and low power all-optical analog to digital converter (AO-ADC), by integrating InGaAsP semiconductor optical amplifier (SOA) with InP based photonic crystal (PhC) drop filters. The self-phase modulation in the SOA can shift the frequency of the Gaussian input pulse. The two output PhC based drop filters are designed to appropriately code the f...
متن کاملPerformances And Limitations Of A Technique For Background Calibration Of Capacitor Mismatch Errors In Pipelined A/D Converters
This paper analyses the performances of a recently proposed background calibration technique with digital cancellation of D/A converter noise, which has been recently proposed for highspeed, high-resolution, pipelined Analog-to-Digital Converters (ADCs).
متن کاملBlind On-line Digital Calibration of Multi-stage Nyquist-rate and Oversampled A/d Converters
A linear calibration technique for on-line digital correction of analog imprecisions in the implementation of multi-stage analog-todigital converters, is presented. The calibration is ‘blind’, in that it uses no reference and operates directly on the digital output during conversion. The only assumption made on the input signal is that its spectrum is bandlimited. The excess sampling over Nyqui...
متن کاملBackground Calibration Techniques for Multistage Pipelined ADCs With Digital Redundancy
The proposed digital background calibration scheme, applicable to multistage (pipelined or algorithmic/cyclic) analog-to-digital converters (ADCs), corrects the linearity errors resulting from capacitor mismatches and finite opamp gain. A high-accuracy calibration is achieved by recalculating the digital output based on each stage’s equivalent radix. The equivalent radices are extracted in the ...
متن کامل