Three-dimensional AlZnO/Al2O3/AlZnO nanocapacitor arrays on Si substrate for energy storage
نویسندگان
چکیده
High density three-dimensional AZO/Al2O3/AZO nanocapacitor arrays have been fabricated for energy storage applications. Using atomic layer deposition technique, the stack of AZO/Al2O3/AZO has been grown in the porous anodic alumina template which is directly formed on the Si substrate. The fabricated capacitor shows a high capacitance density of 15.3 fF/μm2 at 100 kHz, which is nearly 2.5 times over the planar capacitor under identical conditions in theory. Further, the charge-discharge characteristics of the capacitor are characterized, indicating that the resistance-capacitance time constants are equal to 300 ns for the charging and discharging processes, and have no dependence on the voltage supply. This reflects good power characteristics of the electrostatic capacitor.
منابع مشابه
Low-Cost and High-Productivity Three-Dimensional Nanocapacitors Based on Stand-Up ZnO Nanowires for Energy Storage
Highly powered electrostatic capacitors based on nanostructures with a high aspect ratio are becoming critical for advanced energy storage technology because of their high burst power and energy storage capability. We report the fabrication process and the electrical characteristics of high capacitance density capacitors with three-dimensional solid-state nanocapacitors based on a ZnO nanowire ...
متن کاملThree dimensional solid-state supercapacitors from aligned single-walled carbon nanotube array templates
We demonstrate the fabrication of solid-state dielectric energy storage materials from selfassembled, aligned single-walled carbon nanotube arrays (VA-SWNTs). The arrays are transferred as intact structures to a conductive substrate and the nanotubes are conformally coated with a thin metal-oxide dielectric and a conductive counter-electrode layer using atomic layer deposition. Experimental res...
متن کاملSimulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition
The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...
متن کاملControllable synthesis of branched ZnO/Si nanowire arrays with hierarchical structure
A rational approach for creating branched ZnO/Si nanowire arrays with hierarchical structure was developed based on a combination of three simple and cost-effective synthesis pathways. The crucial procedure included growth of crystalline Si nanowire arrays as backbones by chemical etching of Si substrates, deposition of ZnO thin film as a seed layer by magnetron sputtering, and fabrication of Z...
متن کاملPlanar nanowire arrays formed by atomic-terrace low-angle shadowing.
A relatively simple method for preparation of planar nanowire arrays on vicinal substrates by molecular beam epitaxy is presented. The atomic step-and-terrace morphology of vicinal substrates is used to produce a shadowing effect on a highly collimated molecular beam at an oblique incidence to the substrate. The collimation is achieved by placing the evaporation source at a large working distan...
متن کامل