Copper catalyzing growth of single-walled carbon nanotubes on substrates.
نویسندگان
چکیده
Metallic copper, which is normally considered as a contaminant in the growth of single-walled carbon nanotubes (SWNTs), was found to be an efficient catalyst to grow SWNTs under suitable conditions. It showed very high catalytic activity for the growth of both random SWNT networks and horizontally aligned SWNT arrays. Especially, high-quality SWNT arrays were obtained when monodispersed copper nanoparticles were used. The catalytic behavior of copper for the growth of SWNTs was discussed. The weaker interaction between the copper and silica surfaces plays an important role in the growth of high-quality horizontally aligned SWNT arrays. This new synthesis process of SWNTs with a non-ferromagnetic catalyst brings more convenience to the study of magnetic properties of SWNTs and gives more insight in structure-controlled synthesis of SWNTs.
منابع مشابه
A PARAMETRIC STUDY ON THE GROWTH OF SINGLE-WALLED CARBON NANOTUBES OVER CO-MO/MGO NANOCATALYST IN A FLUIDIZED BED REACTOR BY CCVD METHOD
Single-walled carbon nanotubes (SWNTs) with high yield and quality were synthesized using chemical vapor deposition (CVD) over Co-Mo/ MgO nanocatalyst in a fluidized bed reactor. Different parameters such as temperature, the ratio of hydrocarbon source to hydrogen, the flow rate of gas, growth time, the size of catalyst particles, heating rate, and the kind of hydrocarbon source were examined t...
متن کاملGrowth of carbon nanostructures upon stainless steel and brass by thermal chemical vapor deposition method
The lack of complete understanding of the substrate effects on carbon nanotubes (CNTs) growth poses a lot oftechnical challenges. Here, we report the direct growth of nanostructures such as the CNTs on stainless steel 304and brass substrates using thermal chemical vapor deposition (TCVD) process with C2H2 gas as carbon sourceand hydrogen as supporting gas mixed in Ar gas flow. We used an especi...
متن کاملHybrid nanofluid based on CuO nanoparticles and single-walled Carbon nanotubes: Optimization, thermal, and electrical properties
The purpose of this study is to use the thermal and electrical conductivities of copper oxide nanoparticles and carbon nanotubes for the preparation of high-performance nanofluids for achieving better heat transfer properties. These nanofluids consist of a water/Ethylene Glycol solution containing single-wall carbon nanotubes (SWCNTs) and copper oxide nanoparticles (CuONPs). The effects of such...
متن کاملGrowth of high-density parallel arrays of long single-walled carbon nanotubes on quartz substrates.
Herein we report a CVD approach to prepare high-density and perfectly aligned arrays of long SWNTs on stable temperature (ST)-cut quartz substrates using copper as catalyst and ethanol as carbon source. Compared with earlier reports, we have demonstrated that the aligned nanotube arrays can be grown on ST quartz substrate without the need of thermal annealing. The density can reach >50 nanotube...
متن کاملSimple Dip-Coating Process for the Synthesis of Small Diameter Single-Walled Carbon Nanotubes—Effect of Catalyst Composition and Catalyst Particle Size on Chirality and Diameter
We report on a dip-coating method to prepare catalyst particles (mixture of iron and cobalt) with a controlled diameter distribution on silicon wafer substrates by changing the solution's concentration and withdrawal velocity. The size and distribution of the prepared catalyst particles were analyzed by atomic force microscopy. Carbon nanotubes were grown by chemical vapor deposition on the sub...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nano letters
دوره 6 12 شماره
صفحات -
تاریخ انتشار 2006