An Improved Variable-Frequency Drive based on Current Tracking
نویسندگان
چکیده
Variable frequency devices are widely used in many power systems. A current tracking based VFD is proposed in this paper. The output current is firstly fed back and compared with a standard sine wave, the difference of them is then used for a PI regulator to control the PWM signal, so as to change the output current accordingly to make it approach the standard sine wave. Simulation and experiments results show that the current tracking VFD not only has a fast dynamic response, high current tracking precision, current limiting ability, but also has small distortion of the output sine wave current and low loss of the motor.
منابع مشابه
An Improved MPPT Method of Wind Turbine Based on HCS Method by Using Fuzzy Logic System
In this paper presents a Maximum Power Point Tracking (MPPT) technique based on the Hill Climbing Search (HCS) method and fuzzy logic system for Wind Turbines (WTs) including of Permanent Magnet Synchronous Generator (PMSG) as generator. In the conventional HCS method the step size is constant, therefor both steady-state response and dynamic response of method cannot provide at the same time an...
متن کاملAdaptive Voltage-based Control of Direct-drive Robots Driven by Permanent Magnet Synchronous Motors
Tracking control of the direct-drive robot manipulators in high-speed is a challenging problem. The Coriolis and centrifugal torques become dominant in the high-speed motion control. The dynamical model of the robotic system including the robot manipulator and actuators is highly nonlinear, heavily coupled, uncertain and computationally extensive in non-companion form. In order to overcome thes...
متن کاملSpeed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method
In this paper, a new method is proposed for the speed control of a three-phase current forced synchronous machine drive. This metohd is based on the use of an approximate constant commutation safety margin angle in the output thyristor bridge of the drive system as well as on the compenastion of stator magnetization reaction. The commutation process in the output converter of the machine driv...
متن کاملRobust Optimal Speed Tracking Control of a Current Sensorless Synchronous Reluctance Motor Drive using a New Sliding Mode Controller
This paper describes the robust optimal incremental motion control of a current sensorless synchronous reluctance motor (SynRM), which can be specified by any desired speed profile. The control scheme is a combination of conventional linear quadratic (LQ) feedback control method and sliding mode control (SMC). A novel sliding switching surface is employed first, that makes the states of the Sy...
متن کاملSpeed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method
In this paper, a new method is proposed for the speed control of a three-phase current forced synchronous machine drive. This metohd is based on the use of an approximate constant commutation safety margin angle in the output thyristor bridge of the drive system as well as on the compenastion of stator magnetization reaction. The commutation process in the output converter of the machine driv...
متن کامل