An experimental study of the mechanical response of frozen biological tissues at cryogenic temperatures.

نویسندگان

  • Y Rabin
  • P S Steif
  • M J Taylor
  • T B Julian
  • N Wolmark
چکیده

An experimental study of the mechanical response of frozen soft biological tissues to applied compressive stresses is presented. This study is related to the mechanical stresses that develop due to the contraction of frozen tissues in cryopreservation as well as in cryosurgical procedures. The main concept in this study is that the stresses associated with the constrained contraction of the frozen tissue, i.e., due to temperature variations within the frozen tissue, can be simulated by an external mechanical load which is applied to the frozen tissue while the tissue is maintained at a uniform temperature. A new apparatus for measuring compressive stresses and strains of frozen biological tissues in cryogenic temperature range is presented. A new technique for processing the fresh biological tissue into a cylindrical frozen sample for mechanical testing is introduced. Results of compression tests on rabbit liver, kidney, and brain are presented and are compared with available data from the literature on sea ice and single ice crystals. An unusual response of frozen biological tissues to compressive stress was observed: after the initial, roughly linear elastic portion there was a series of sudden stress drops at constant strain, each followed by a linear increase of stress with strain to the next drop. This phenomenon, which is attributed to the accumulation of microcracks, broadly resembles plastic deformation, and thus provides some support for simple mechanical models invoked in theoretical studies.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel

Cryogenic treatment can be used as a supplemental treatment that is performed on some tool steels between quenching and tempering as an effective method for decreasing retained austenite and increasing wear resistance. In this research, the effect of deep cryogenic treatment (DCT) on dimensional stability and mechanical properties of 80CrMo12 5 tool steel was investigated. The martensitic trans...

متن کامل

Thermal expansion of blood vessels in low cryogenic temperatures Part I: A new experimental device.

As part of the ongoing effort to study the mechanical behavior of biological material during cryopreservation processes, the current study focuses on thermal expansion of blood vessels at low cryogenic temperatures. The current paper (Part I) describes a new experimental device for thermal expansion measurements of blood vessels in typical conditions of vitrification, which are associated with ...

متن کامل

Gross damage accumulation on frozen rabbit liver due to mechanical stress at cryogenic temperatures.

The second phase of a pilot study dealing with the mechanical response of frozen biological tissues to external compressive load is presented. This stage deals with histological observations of the damage accompanying mechanically induced permanent deformation in frozen rabbit liver. no significant gross histological damage was observed in the liver samples due to either processing the tissue i...

متن کامل

Thermal/mechanical Response and Damage Growth in Polymeric Composites at Cryogenic Temperatures

In order to increase the reliability of the next generation of space transportation systems, the mechanical behavior of polymeric matrix composite (PMC) materials at cryogenic temperatures must be investigated. This paper presents experimental data on the residual mechanical properties of a carbon fiber polymeric composite, IM7/PETI-5 both before and after aging at cryogenic temperatures. Tensi...

متن کامل

Comparison of Tribological Behavior of Deep Cryogenic Treated Hot Work Tool Steel at Room and High Temperature

The deep cryogenic treatment is a complementary operation that is done on a variety of tool steels aimed at improving their abrasion resistance and hardness. In the case of the H13 hot-work steel, which is widely used at high temperatures as a hot-deformation tool, we need to determine the efficiency of subzero treatment on it at the working temperature. In this regard, this paper is focu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Cryobiology

دوره 33 4  شماره 

صفحات  -

تاریخ انتشار 1996