Interface microstructure of alumina mechanically metallized with Ti brazed to Fe–Ni–Co using different fillers
نویسندگان
چکیده
R.M. Nascimento a,∗, A.E. Martinelli a, A.J.A. Buschinelli b, E. Sigismund c,1 a Universidade Federal do Rio Grande do Norte, Departamento de Engenharia de Materiais, CP. 1524, Campus Lagoa Nova, Natal, RN 59072-970, Brazil b Universidade Federal de Santa Catarina, Departamento de Engenharia Mecânica, Laboratório de Soldagem, Labsolda, CP. 476 Campus Trindade, Florianópolis, SC, Brazil c Forschungszentrum Juelich (FZ-Juelich), ZAT, Germany
منابع مشابه
Microstructural study of Ti/3YSZ interface in NI 105/Ni/Nb/Ti/3YSZ diffusion bonding
In this research, the diffusion bonding of the stabilized zirconia ceramic and Nimonic 105 superalloy using Ti/Nb/Ni multi-interlayer was carried out. Joint was performed using the plasma spark technique in a vacuum atmosphere and at different temperatures and times. The microstructure of the different joint zones was studied using optical and FESEM microscopes equipped with an EDS analyzer. Th...
متن کاملMicrostructural study of Ti/3YSZ interface in NI 105/Ni/Nb/Ti/3YSZ diffusion bonding
In this research, the diffusion bonding of the stabilized zirconia ceramic and Nimonic 105 superalloy using Ti/Nb/Ni multi-interlayer was carried out. Joint was performed using the plasma spark technique in a vacuum atmosphere and at different temperatures and times. The microstructure of the different joint zones was studied using optical and FESEM microscopes equipped with an EDS analyzer. Th...
متن کاملBulk TiB2-Based Ceramic Composites with Improved Mechanical Property Using Fe–Ni–Ti–Al as a Sintering Aid
The densification behavior, microstructure and mechanical properties of bulk TiB₂-based ceramic composites, fabricated using the spark plasma sintering (SPS) technique with elements of (Fe-Ni-Ti-Al) sinter-aid were investigated. Comparing the change of shrinkage displacement of pure TiB₂ and TiB₂-5 wt% (Fe-Ni-Ti-Al), the addition of elements Fe-Ni-Ti-Al into TiB₂ can facilitate sintering of the...
متن کاملAn investigation on metallurgical and mechanical properties of vacuum brazed Ti-6Al-4V to 316L stainless steel using Zr-based filler metal
Both Ti-6Al-4V and 316L stainless steels are widely used as engineering alloys. Fusion welding of these two alloys is not easily possible due to their incomplete solubility in each other. Brazing is one of the best choices for joining dissimilar alloys. In this study, wettability experiments were done at 940 and 970 ºC for 5, 15 and 30 min. Also, joining of these two alloys was carried out at 9...
متن کاملEffect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS
In this paper TiB2-TiC/Ni cermet with various Ni (20, 40 and 60 wt %) content were synthesized by mechanically activated self-propagating synthesis (MASHS) and effect of the addition of Ni on synthesis parameters and microstructure of synthesized samples were investigated. First raw materials (B4C, Ti and Ni) milled in Ar atmosphere. Then milling powders analyzed by XRD. In next step powders sy...
متن کامل