Impact of Channel Prediction on the Performance of MIMO E-SDM Systems in Actual Dynamic Channels
نویسندگان
چکیده
By transmitting orthogonal eigenbeams and controlling transmit data resource allocation, the Multiple-Input Multiple-Output (MIMO) system using an Eigenbeam-Space Division Multiplexing (ESDM) technique, namely MIMO E-SDM system, performs very well and is considered as one of the promising candidates for future high-rate wireless communications [1–3]. However, the system performance may be degraded due to the processing delay at both the transmitter (TX) and the receiver (RX) in dynamic channels. Considering the delay in the channels, an effective approach in adaptive systems is to predict the channel values at the future data transmission time. We have proposed some channel prediction methods [4,5], and simulation results based on Jakes channel model [6] showed that MIMO ESDM systems using the methods outperformed the conventional unpredicted system in Rayleigh fading environments. In actual communications, scatterers may not be uniformly distributed around the RX and/or the TX, and MIMO systems may be used in Rician fading environments. Also, mutual coupling between antenna elements, which affects the MIMO system performance, could not be ignored. Therefore, more investigations into the system performance using the proposed methods in realistic cases are necessary. Most of the MIMO measurement campaigns have been conducted in time-invariant (i.e., Doppler frequency of 0 Hz) fading environments until now. However, due to mobile terminals’ and/or scatterers’ motion there will be time-varying fading in actual environments. So, measurement campaigns for such environments are very important. Unfortunately, to the best of our knowledge, just a few MIMO measurement campaigns assuming the environments have been conducted [7]. We conducted MIMO measurement campaigns in indoor time-varying fading environments. Based on the measured data, we evaluated the impact of the channel predictions on the performance of the 2×2 MIMO E-SDM system in actual dynamic channels.
منابع مشابه
Title Performance Evaluation of a Multi-User MIMO System With Prediction of Time-Varying Indoor Channels
In this paper, the performance of a multi-user multiple-input multiple-output (MIMO) system in time-varying channels is evaluated using measurement data. We consider the multi-user MIMO system using a block diagonalization (BD) scheme and an eigenbeam-space division multiplexing (E-SDM) technique. In an ideal case, the BD scheme eliminates inter-user interference, and the E-SDM technique suppre...
متن کاملEffects of Mutual Coupling and Doppler Spectrum on the Performance of 2 × 2 MIMO E-SDM Systems
To satisfy the dramatically growing wireless mobile communication demands, using multiple antennas at both a base station and a mobile terminal, referred as a multiple-input multiple-output (MIMO) system, is a promising major breakthrough. Without additional power and spectrum compared with conventional single-input single-output (SISO) systems, channel capacity of MIMO systems can increase pro...
متن کاملMIMO E-SDM Transmission Performance in an Actual Indoor Environment
MIMO systems using a space division multiplexing (SDM) technique in which each transmit antenna sends an independent signal substream have been studied as one of the successful applications to increase data rates in wireless communications. The throughput of a MIMO channel can be maximized by using an eigenbeam-SDM (E-SDM) technique, and this paper investigates the practical performance of 2×2 ...
متن کاملChannel Prediction Techniques for a Multi-User MIMO System in Time-Varying Environments
Although multi-user multiple-input multiple-output (MIMO) systems provide high data rate transmission, they may suffer from interference. Block diagonalization and eigenbeam-space division multiplexing (E-SDM) can suppress interference. The transmitter needs to determine beamforming weights from channel state information (CSI) to use these techniques. However, MIMO channels change in time-varyi...
متن کاملMeasurement of Time-Varying MIMO Channels and Performance Evaluation of Spatial Multiplexing
MIMO spatial multiplexing is a key technology to increase channel capacity. The performance depends on channels including antenna characteristics. In eigenbeam space division multiplexing (E-SDM), not only a receiver but also a transmitter needs channel state information (CSI). The performance of an E-SDM system may degrade in timevarying environments because CSI at the transmitter is outdated....
متن کامل