Mg/Ti multilayers: Structural and hydrogen absorption properties
نویسندگان
چکیده
A. Baldi,1,2,* G. K. Pálsson,3 M. Gonzalez-Silveira,1 H. Schreuders,2 M. Slaman,1,2 J. H. Rector,1 G. Krishnan,4 B. J. Kooi,4 G. S. Walker,5 M. W. Fay,6 B. Hjörvarsson,3 R. J. Wijngaarden,1 B. Dam,2 and R. Griessen1 1Department of Physics and Astronomy, VU University Amsterdam, De Boelelaan 1081, 1081 HV Amsterdam, The Netherlands 2Department of Chemical Engineering, Delft University of Technology, Julianalaan 136, 2600 GA Delft, The Netherlands 3Department of Physics, Uppsala University, P.O. Box 530, S-751 21 Uppsala, Sweden 4Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands 5Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, United Kingdom 6Nottingham Nanotechnology and Nanoscience Centre, University of Nottingham, Nottingham NG7 2RD, United Kingdom Received 30 November 2009; revised manuscript received 6 April 2010; published 8 June 2010
منابع مشابه
THE FORMATION OF TiAl3 DURING HEAT TREATMENT IN EXPLOSIVELY WELDED Ti-Al MULTILAYERS
Metallic-intermetallic laminate (MIL) composites are promising materials for structural applications especially in the aerospace industry. One of the interesting laminate composites is the Ti-TiAl 3 multilayer. In this work, commercially pure sheets of aluminum and titanium with almost equal thickness of around 0.5 mm were explosively joined. The achieved multilayers were annealed at 630 ℃in di...
متن کاملMagnetic Properties and Structural Study of Ni-Co/Cu Multilayers Prepared by Electrodeposition Method
Ni-Co/Cu multilayers have been grown by electrodeposition method from a single electrolyte (based on Ni(SO4).6H2O, Co(SO4).7H2O, Cu(SO4) and H3BO3) using galvanostatic control on titanium sublayers. The X-ray diffraction (XRD) patterns confirmed the multilayered structure with the nanometer thicknesses. Also, electron diffraction x-ray (EDX) analysis confirmed the purity of deposited samples. ...
متن کاملSynthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy
The hydrogenation characterizations of the hydrogen storage alloy MmNi4.22Co0.48Mn0.15Al0.15 (Mm= mischmetal), and the effect of hydrogenation/dehydrogenation (H/D) cycling on its structural and morphological properties are investigated. The results indicate that after several H/D cycles the alloy was pulverized into fine particles, but it kept its hexagonal CaCu5-type structure. The pressure-c...
متن کاملThermodynamically destabilized hydride formation in "bulk" Mg-AlTi multilayers for hydrogen storage.
Thermodynamic destabilization of MgH2 formation through interfacial interactions in free-standing Mg-AlTi multilayers of overall "bulk" (0.5 μm) dimensions with a hydrogen capacity of up to 5.5 wt% is demonstrated. The interfacial energies of Mg-AlTi and Mg-Ti (examined as a baseline) are calculated to be 0.81 and 0.44 J m(-2). The enhanced interfacial energy of AlTi opens the possibility of cr...
متن کاملElectromagnetic absorption and structural properties of SrFe11.98Mg0.1Sn0.1O19/BaTiO3 nanocomposites
In this research, first, nanoparticles of SrFe11.98Mg0.1Sn0.1O19 hexaferrite was synthesized via sol-gel auto-combustion process and then the nanocomposites of hexagonal ferrites/perovskite with the amounts of SrFe11.98Mg0.1Sn0.1O19/BaTiO3 (50/50, 40/60, 70/30 w/w) was prepared by the ball-milling...
متن کامل