Design of Rectangular Microstrip Patch Antenna Array
نویسندگان
چکیده
In this paper the rectangular microstrip patch antenna arrays has been designed for S, C and X-band application by using the IE3D simulator. Roger RT/duroid material with dielectric constant 2.2 and height 1.588 has been used as a substrate material. Microstrip inset line feed has been used for feeding the rectangular patch antenna. Here 1x2 and 1x4 patch antenna array has been designed using series feed network and performance parameters of patch antennas array such as return loss, gain, directivity and VSWR has been computed and compared.
منابع مشابه
Design Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملModified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملDesign Of Single & 1x1 Microstrip Rectangular Patch Antenna Array Operating At 2.4 GHz Using ADS
This article describes the design of single microstrip rectangular patch antenna and 1x1 microstrip rectangular patch antenna arrays operating at 2.4 GHz. Simulation result shows that 5.199 dB and 7.84 dB gain can achieved at frequency 2.4 GHz. Also simulation result show that the return loss is 18.809 at 2.360 GHz in 1x1 microstrip antenna array and current distribution and 3D radiation patter...
متن کاملA Wideband Rectangular-slot Microstrip Array Antenna for Wireless Applications
This paper presents the design of a 2 x 2 microstrip array antenna suitable for wireless applications. The proposed antenna comprises of 4 rectangular patches where diagonal patches have the same length and width. A larger bandwidth and the desired resonant frequency are achieved because of a reduction in the quality factor (Q) of the patch resonator, which is due to less energy being stored be...
متن کامل