Longitudinal changes in ultrasonic measurements of body composition during growth in Suffolk ram lambs and evaluation of alternative adjustment strategies for ultrasonic scan data.
نویسندگان
چکیده
Four equations were used to compare alternative procedures to adjust ultrasonic estimates (y) of backfat thickness (BF) and LM area (LMA) for BW using data from a series of 7 scans on 24 Suffolk ram lambs born in 2007. Equations were linear, linear + quadratic, allometric (y = alphaBW(beta)), and allometric + BW (ABW; y = alphaBW(beta)e(gammaW)). Goodness of fit was very similar between equations over the range of the data. Resulting adjustment equations were tested using 3 serial scans on winter-born Suffolk (n = 150), Hampshire (n = 36), and Dorset (n = 43) rams and 52 fall-born Dorset rams tested at the Virginia Ram Test in 1999 through 2002. Partial correlations (accounting for the effect of year) between predicted and actual measures ranged from 0.78 to 0.87 for BF and 0.66 to 0.93 for LMA in winter-born rams and from 0.70 to 0.71 for BF and 0.72 to 0.78 for LMA in fall-born rams. No significant differences in predictive ability existed between equations for BF or LMA (P > 0.05), and there was no indication that the allometric equation was a better predictor than linear within the range of the data. Adjustment equations were also tested using serial scan data from 37 Suffolk ewe lambs born in the same contemporary group as the rams used to derive the prediction equations but fed for a substantially slower rate of BW gain. Correlations between predicted and actual values of BF and LMA indicated lambs were too young and small at the first scan (77 d, 32.4 kg) to reliably predict carcass measures at typical slaughter weights. For prediction using data from the 2 subsequent scans, at mean ages >96 d and mean BW >39 kg, correlations between predicted and actual values were 0.72 to 0.74 for BF and 0.54 to 0.76 for LMA. Little difference existed between equations for predicting BF. For LMA, the ABW form was a weaker predictor than the others, and the linear equation was slightly superior to allometric. Therefore, it appears the linear and allometric forms are both suitable for use in central ram test and performance-tested farm flocks.
منابع مشابه
Numerical and analytical investigation of an ultrasonic assisted ECAP process
One of the great challenges in the processing of materials using Equal Channel Angular Pressing (ECAP) is the high forming forces required to produce large shear deformation in the material. Researchers show that the friction forces between the die and the sample constitute a great part of the total forming forces. Recently, ultrasonic vibrations are successfully implemented into the ECAP proce...
متن کاملEvaluation of Columbia, USMARC-Composite, Suffolk, and Texel rams as terminal sires in an extensive rangeland production system: II. Postweaning growth and ultrasonic measures of composition for lambs fed a high-energy feedlot diet1,2
ABSTRACT: Over 3 yr, postweaning growth patterns and changes in ultrasonic measurements of fat depth (FD) and LM area were assessed for 1,049 crossbred ewe and wether lambs (Ovis aries) produced by mating adult Rambouillet ewes to 1 of 22 Columbia, 22 USMARC-Composite (Composite), 21 Suffolk, or 17 Texel rams and raised to weaning under extensive Western rangeland conditions. After weaning, lam...
متن کاملUsing the Ultrasonic Nondestructive Methods for Prediction of Mechanical Properties of AISI 4140 Alloy Steel
Achieving the mechanical properties of steels after various manufacturing and heat treatment processes is significant and essential. In production lines, after producing the specific and standard samples, mechanical properties have been measured by destructive processes which cause waste of cost and time. In addition, destructive techniques cannot detect the miniscule changes made in mechanical...
متن کاملMeasurement and Modelling of the Rubber Resilience based on Ultrasonic Non-destructive Testing in Tires
In tire industry, it is very crucial to evaluate physical and mechanical properties of the rubber which is used for production of the tire, to ensure the quality of the final product. Resilience is an important property of a rubber, which cannot be evaluated through direct measurement in production cycle in this industry. Therefore, non-destructive ultrasonic testing, which has been used in man...
متن کاملElastic characterization of porous bone by ultrasonic method through Lamb waves
The object of this research is to characterize the porous bones by an ultrasonic method using Lamb waves. In recent years, the characterization of such materials has attracted many authors and takes a perfect place in the field of medicine. It requires the development of more efficient technology for getting the necessary quality and security. This paper aims to exploits the dispersion curves o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of animal science
دوره 88 4 شماره
صفحات -
تاریخ انتشار 2010