A new model reference control architecture: Stability, performance, and robustness
نویسندگان
چکیده
In this paper, we develop a new model reference control architecture to effectively suppress system uncertainties and achieve a guaranteed transient and steady-state system performance. Unlike traditional robust control frameworks, only a parameterization of the system uncertainty given by unknown weights with known conservative bounds is needed to stabilize uncertain dynamical systems with predictable system performance. In addition, the proposed architecture’s performance is not dependent on the level of conservatism of the bounds of system uncertainty. Following the same train of thought as adaptive controllers that modify a given reference system to improve system performance, the proposed method is inspired by a recently developed command governor theory that minimizes the effect of system uncertainty by augmenting the input signal of the uncertain dynamical and reference systems. Specifically, a dynamical system, called a command governor, is designed such that its output is used to modify the input of both the controlled uncertain dynamical and reference systems. It is theoretically shown that if the command governor design parameter is judiciously selected, then the controlled system approximates the given original, unmodified reference system. The proposed approach is advantageous over model reference adaptive control approaches because linearity of the uncertain dynamical system is preserved through linear control laws, and hence, the closed-loop performance is predictable for different command spectrums. Additionally, it is shown that the architecture can be modified for robustness improvements with respect to high frequency content due to, for example, measurement noise. Modifications can also be made in order to accommodate actuator dynamics and retain closed-loop stability and predictable performance. The main contribution of this paper is the rigorous analysis of the stability and performance of a system utilizing the command governor framework. A numerical example is provided to illustrate the effectiveness of the proposed architecture. Copyright © 2015 John Wiley & Sons, Ltd.
منابع مشابه
Incremental Predictive Command of Velocity to Be Gained Guidance Method
In this paper, a new incremental predictive guidance method based on implicit form of velocity to be gained algorithm is proposed. In this approach, the generalized incremental predictive control (GIPC) approach is applied to the linearized model for compensating the guidance error. Instead of using the present state in popular model based predictive controller (MPC), in the new method both pre...
متن کاملAnalysis of Speed Control in DC Motor Drive Based on Model Reference Adaptive Control
This paper presents fuzzy and conventional performance of model reference adaptive control(MRAC) to control a DC drive. The aims of this work are achieving better match of motor speed with reference speed, decrease of noises under load changes and disturbances, and increase of system stability. The operation of nonadaptive control and the model reference of fuzzy and conventional adaptive contr...
متن کاملVehicle Stabilization via a Self-Tuning Optimal Controller
Nowadays, using advanced vehicle control and safety systems in vehicles is growing rapidly. In this regard, in recent years new control systems, called VDC, have been introduced. These systems stabilize vehicle yaw motion, by yaw moment resulted from tire controlling forces. In this paper, an adaptive optimal controller applied to a vehicle to obtain a satisfactory lateral and yaw stability. To...
متن کاملSensorless Model Reference Adaptive Control of DFIG by Using High Frequency Signal Injection and Fuzzy Logic Control
In this paper, a new sensorless model reference adaptive method is used for direct control of active and reactive power of the doubly fed induction generator (DFIG). In order to estimate the rotor speed, a high frequency signal injection scheme is implemented. In this study, to improve the accuracy of speed estimation, two methods are suggested. First, the coefficients of proportional-integral ...
متن کاملA New Robust Control Design Based on Feedback Compensator for Sssc
In this paper, the modified linearized Phillips-Heffron model is utilized to theoretically analyze asingle-machine infinite-bus (SMIB) installed with SSSC. Then, the results of this analysis are used forassessing the potential of an SSSC supplementary controller to improve the dynamic stability of apower system. This is carried out by measuring the electromechanical controllability through sing...
متن کامل