Life Cycle Environmental Impacts of Two Options for Msw Management in New York City: Modern Landfilling Vs Waste to Energy
نویسنده
چکیده
The U.S. generates about 370 million short tons of Municipal Solid Waste (MSW) each year. In 2002, an average of 26.9% of this material was either recycled or composted. Of the remainder, an estimated 242 million short tons were disposed of in landfills and about 29 million short tons were combusted in Waste to Energy (WTE) facilities to produce electricity and scrap metal. Effective management of MSW is becoming increasingly challenging, especially in densely populated regions, such as New York City, where there is little or no landfill capacity and the tipping fees have doubled and tripled in recent years. There is also a growing appreciation of the environmental implications of landfills. Even with modern landfill construction, impacts remain from the need for transfer stations to handle putrescible wastes, their transport to distant landfills, and finally landfill gas emissions and potential aqueous run-off. Environmental impacts of concern associated with disposal in WTEs include air emissions of metals, dioxins and greenhouse gases. In the U.S., there is also a strong negative public perception of WTE facilities. Decisions about waste management should be influenced by a consideration of the overall, quantified life-cycle environmental impacts of different options. In this paper we therefore develop a methodology to assess these impacts for landfilling and WTE waste management options. Specifically we attempt to compare these two options for New York City, a large urban area.
منابع مشابه
Selecting the best options of management of municipal solid waste using life cycle assessment methodology (case study: Noor city)
Background and Objective: one of the major challenges in urban management in human societies is related to the collection, recycling and disposal of solid waste and sewage. Poor waste management causes pollution of water, soil and air. It will have a major impact on public health. The aim of present study was to investigate the current status and select the best options of management of munici...
متن کاملEnvironmental assessment of alternative strategies for municipal solid waste management by means of life cycle assessment modelling (a case study: Chalus, Iran)
Background and Objective: Due to the increasing trend of municipal solid waste (MSW) production, if a suitable management system is not applied, it will lead to environmental pollution and endanger human health. The aim of this study was to compare different scenarios of waste management in Chalous city with life cycle assessment (LCA) approach and to select the most efficient method in terms o...
متن کاملEnvironmental implications of municipal solid waste-derived ethanol.
We model a municipal solid waste (MSW)-to-ethanol facility that employs dilute acid hydrolysis and gravity pressure vessel technology and estimate life cycle energy use and air emissions. We compare our results, assuming the ethanol is utilized as E85 (blended with 15% gasoline) in a light-duty vehicle, with extant life cycle assessments of gasoline, corn-ethanol, and energy crop-cellulosic-eth...
متن کاملEnvironmental Assessment of Life Cycle of Waste Management System Based on LCAIWM1 Modeling (Case Study: Rasht City)
Background: Population growth and increased human activities in urban communities lead to large volumes of waste. This waste volume causes problems for human health and environmental pollution. Recently, a living environment assessment has been developed to improve the situation. The purpose of this study is to compare the environmental impacts of four urban waste disposal scenarios in Rasht ci...
متن کاملPublished in American Society of Mechanical Engineers Proceedings of NAWTEC 10, May 2002, p. 69-86 INTEGRATED MANAGEMENT OF SOLID WASTES FOR NEW YORK CITY
This report presents the results of a study that examined alternatives to landfilling the municipal solid wastes (MSW) of New York City. Detailed characterization of the wastes led to their classification, according to materials properties and inherent value, to “recyclable”, compostable”, “combustible”, and “landfillable”. The results showed that the present rates of recycling (16.6%) and comb...
متن کامل