Broadband multilayer in-phase power divider
نویسندگان
چکیده
A new broadband in-phase power divider based on multilayer technology is presented. A simple design procedure is developed for the proposed multilayer power divider. An S-band four-way multilayer power divider was designed and measured. The simulated results are compared with the measured data, and good agreement is reported. The measured 15 dB return loss bandwidth is demonstrated to be about 72%, and its phase difference between the output signals is less than 38.
منابع مشابه
Compact Ultra-Wideband In-Phase Multilayer Power Divider
A novel compact ultra-wideband (UWB) in-phase multilayer slotline power divider with high isolation is presented as a complement in slotline power divider field. The new structure proposed in this paper overcomes the shortcoming that power divider based on slotline almost cannot obtain high isolation between output ports. Based on the equivalent-circuit of microstrip-to-slotline transition and ...
متن کاملA Broadband Out-of-phase Power Divider for High Power Applications Using through Ground via (tgv)
In this paper, we present a broadband out-of-phase power divider with high power-handling capability. The proposed device consists of several sections of double-sided parallel-strip lines (DSPSLs), a mid-inserted conductor plane, and two external isolation resistors, which are directly grounded for heat sinking. A through ground via (TGV), connecting the top and bottom sides of DSPSLs, is emplo...
متن کاملA Two-Layer Substrate Integrated Waveguide Out-of-Phase Power Divider
Substrate integrated waveguides (SIWs) have been proposed and applied to develop a two-way out-ofphase power divider in this paper. This newly proposed structure shows good performance in wide frequency range from 8.6 GHz to 10.6 GHz. The proposed multilayer SIW out-of phase power divider consists of two layer of substrates of Rogers 5880 with thickness of 0.508 millimeters. The input at the up...
متن کاملOptimized Broadband Wilkinson Balun - Design and Analysis Using Metamaterial
The design presented here mainly focuses on implementation of a broadband Wilkinson balun using composite right/left-handed (CRLH) transmission line. This has its components, namely Wilkinson power divider (WPD), microstrip phase shift line and CRLH unit cell along with interdigital capacitor, which forms base of the unit cell. The designing and implementation of WPD, CRLH unit cell and Interdi...
متن کاملA 27GHz Frequency Divider in 0.18μm CMOS Technology
This paper presents a broadband high operating frequency divide-by-2 frequency divider. This divider uses sourcecoupled logic (SCL) with two static loading master-slave D latches which achieves high input operating frequency, high input sensitivity and low power dissipation. This divider can work from 8GHz~ 27GHz and the input power is -40dBm@18GHz. The chip area is 735μm×480μm with only 4.6mW ...
متن کامل