Activity and deactivation studies for direct dimethyl ether synthesis using CuO-ZnO-Al2O3 with NH(4)ZSM-5, HZSM-5 or gamma-Al2O3
نویسندگان
چکیده
Herein we investigate the use of CuO-ZnO-Al2O3 (CZA) with different solid acid catalysts (NH4ZSM-5, HZSM-5 or γ-Al2O3) for the production of dimethyl ether from syngas. It was found that of the solid acids, which are necessary for the dehydration function of the admixed system, the CZA/HZSM-5 bifunctional catalyst with a 0.25 acid fraction showed high stability over a continuous period of 212 hr. As this particular system was observed to loose around 16.2 % of its initial activity over this operating period this study further investigates the CZA/HZSM-5 bifunctional catalyst in terms of its deactivation mechanisms. TPO investigations showed that the catalyst deactivation was related to coke deposited on the metallic sites; interface between the metallic sites and the support near the metal-support; and on the support itself.
منابع مشابه
A comparative study on the dispersion of CuO-ZnO-Al2O3 nanoparticles over HZSM-5 via batch co-precipitation, semibatch co- precipitation and combined co-precipitation-ultrasound methods
A series of CuO-ZnO-Al2O3 nanoparticles over HZSM-5 were successfully prepared using different methods of batch co-precipitation, semibatch co-precipitation and combined co-precipitation-ultrasound. Nitrates of copper, zinc and aluminum were used as precursors, while Na-ZSM-5 was employed as composite support and sodium carbonate was used as precipitant agent. The effects of preparation methods...
متن کاملHydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study
Hydrogen was produced by steam reforming of dimethyl ether (DME) using a physical mixture of commercial HZSM-5 zeolite (for DME hydrolyzing) and Cu/ZnO/Al2O3 (for methanol steam reforming) as a catalyst in a fixed bed reactor. The experiments were performed at atmospheric pressure and in a temperature range from 270 to 310 °C. The effects of feed temperature and gas hourly space velocity (GHSV)...
متن کاملConversion of Methanol on CuO/H-MOR and CuO/H-ZSM-5 Catalysts.
This paper deals with maximizing dimethyl ether (DME) production from methanol due to its industrial importance as a future diesel fuel. The high acidity and the micro-porous structure of the catalysts encouraged this reaction. Catalysts containg 6% CuO supported on H-ZSM-5 and H-MOR zeolites give high activities for DME production. The 6% CuO/HMOR is more selective for DME production, while th...
متن کاملThe Effect of Sodium on the Catalytic Activity of ZnO-Al2O3/ZSM-5 and SnO-Al2O3/ZSM-5 for the Transesterification of Vegetable Oil with Methanol
In order to elucidate the effect of sodium on the activity of ZSM-5 supported metal oxides catalysts (ZnO-Al2O3/ZSM-5 and SnO-Al2O3/ZSM-5) for the transesterification of soybean oil with methanol, ZSM-5 supported metal oxides were prepared with and without sodium hydroxide by impregnation. The metal compositions of the ZSM-5 supported metal oxide catalysts and the metal concentrations dissolved...
متن کاملKinetic Parameters and Dynamic Modeling of a Reactor for Direct Conversion of Synthesis Gas to Dimethyl Ether
In the present study, the reaction kinetics and dynamic modeling of a reactor for syngas transformation into dimethyl ether using a mixture of a metallic oxides (CuO, ZnO, and Al2O3) and an acidic component (γ-Al2O3) as the catalyst has been investigated. A combination of the Graaf kinetic model for methanol synthesis and the Bercic model for methanol dehydration was correlated with the experim...
متن کامل