Remote actuation mechanism for mr-compatible manipulator using leverage and parallelogram - workspace analysis, workspace control, and stiffness evaluation
نویسندگان
چکیده
In this paper, a novel mechanism of remote actuation was proposed and its mechanical problems were discussed. This mechanism consists of leverage and parallelogram mechanism and transmits 3 d.o.f translational and 3 d.o.f rotational motions from the input to output. Such a remote actuation is significantly useful for robotic assist around MRI where the strong and precise magnet is used for imaging, because mutual effect between MRI and robot are inverse proportional to the distance. In this paper, the basic ideas of mechanism were introduced firstly. The discussions of its stiffness and workspace conclude their trade-off. Our new idea of workspace control for mechanical safety is preliminary discussed.
منابع مشابه
Design and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator
This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...
متن کاملStiffness control of a legged robot equipped with a serial manipulator in stance phase
The ability to perform different tasks by a serial manipulator mounted on legged robots, increases the capabilities of the robot. The position/force control problem of such a robot in the stance phase with point contacts on the ground is investigated here. A target plane with known stiffness is specified in the workspace. Active joints of the legs and serial manipulator are used to exert the de...
متن کاملInterval Analysis of Controllable Workspace for Cable Robots
Workspace analysis is one of the most important issues in the robotic parallel manipulator design. However, the unidirectional constraint imposed by cables causes this analysis more challenging in the cabledriven redundant parallel manipulators. Controllable workspace is one of the general workspace in the cabledriven redundant parallel manipulators due to the dependency on geometry parameter...
متن کاملAn Efficient Algorithm for Workspace Generation of Delta Robot
Dimensional synthesis of a parallel robot may be the initial stage of its design process, which is usually carried out based on a required workspace. Since optimization of the links lengths of the robot for the workspace is usually done, the workspace computation process must be run numerous times. Hence, importance of the efficiency of the algorithm and the CPU time of the workspace computatio...
متن کاملSimultaneous Trajectory Tracking and Stiffness Control of Cable Actuated Parallel Manipulator
∗ Corresponding author, Phone: (716) 645-1430, Fax: (716) 645-3668, Email: [email protected]. ABSTRACT Cable-actuated parallel manipulators combine benefits of large workspaces, significant payload capacities and high stiffness by virtue of the cable actuation. However, redundant/surplus cables are required to overcome the unidirectional nature of forces exertable by cables. This leads to ...
متن کامل