UiO-66-polyether block amide mixed matrix membranes for CO2 separation

نویسندگان

  • Jie Shen
  • Gongping Liu
  • Kang Huang
  • Qianqian Li
  • Kecheng Guan
  • Yukai Li
  • Wanqin Jin
چکیده

Mixed matrix membranes containing metal-organic frameworks have attracted large attention owing to the combined advantages of high separation performance and easy processability. In this work, CO2-philic zirconium metal organic framework UiO-66 and UiO-66-NH2 nanocrystals were synthesized and embedded into polyether block amide (PEBA) polymer membranes for CO2 separation. It can be found that amine-functionalization endowed UiO-66-NH2 nanoparticles with stronger CO2 affinity compared with that of UiO-66. Also, the hydrogen bonding frameworks between UiO-66-NH2 and PEBA were enhanced, leading to improved dispersibility in polymer matrix. Both the UiO-66-PEBA and UiO-66-NH2-PEBA mixed matrix membranes showed much higher CO2 separation performance than that of pure PEBA membrane. Especially, amine functionalization of the porous frameworks provided the soprepared UiO-66-NH2-PEBA mixed matrix membrane with higher CO2/N2 selectivity and slightly decreased CO2 permeability than those of UiO-66-PEBA membrane. The developed UiO-66-NH2-PEBA mixed matrix membrane (with MOFs loading of 10 wt%) was tested in humid state and showed excellent and stable CO2/N2 separation performance (CO2 permeability of 130 Barrer, CO2/N2 selectivity of 72) surpassing the upper bound of polymer membranes. This type of UiO-66 based mixed matrix membranes featuring with excellent structural stability and significantly improved gas separation performance offer promising potential for CO2 capture. & 2016 Elsevier B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Ethylene Oxide Functional Groups in PEBA-CNT Membranes on CO2/CH4 Mixed Gas Separation

Poly (ether-block-amide) /poly (ethylene glycol)/ carbon nanotubes mixed matrix membranes have been successfully fabricated using solvent evaporation method to determine the effect of ethylene oxide groups on the performance of produced membranes. The effects of CNTs (2-8 wt%) and PEG (up to 50 wt%)were investigated in both single and mixed gas test setup in different temperature and pressure. ...

متن کامل

Preparation of Poly(ether-6-block amide)/PVC Thin Film Composite Membrane for CO2 Separation: Effect of Top Layer Thickness and Operating Parameters

In this work, novel thin film composite membranes (TFCs) of poly (ether-6-block amide) (Pebax-1657) on a polyvinyl chloride (PVC) ultrafiltration membrane as support were prepared using inclined coating method for CO2 separation. Investigating the effects of top selective layer thickness formed by controlling the coating angle (15-60°) and polymer solution concentration (5-10 wt.%), ...

متن کامل

Size Effects of Graphene Oxide on Mixed Matrix Membranes for CO2 Separation

Graphene oxide (GO)-polyether block amide (PEBA) mixed matrix membranes were fabricated and the effects of GO lateral size on membranes morphologies, microstructures, physicochemical properties, and gas separation performances were systematically investigated. By varying the GO lateral sizes (100–200 nm, 1–2 lm, and 5–10 lm), the polymer chains mobility, as well as the length of the gas channel...

متن کامل

Post-synthetic Ti Exchanged UiO-66 Metal-Organic Frameworks that Deliver Exceptional Gas Permeability in Mixed Matrix Membranes

Gas separation membranes are one of the lowest energy technologies available for the separation of carbon dioxide from flue gas. Key to handling the immense scale of this separation is maximised membrane permeability at sufficient selectivity for CO2 over N2. For the first time it is revealed that metals can be post-synthetically exchanged in MOFs to drastically enhance gas transport performanc...

متن کامل

Enhanced CO2/N2 separation performance by using dopamine/polyethyleneimine-grafted TiO2 nanoparticles filled PEBA mixed-matrix membranes

Mixed matrix membranes (MMMs) were fabricated by incorporating synthesized titanium dioxide (TiO2) nanoparticles into polyether block amide (PEBA) matrix to fabricate TiO2/PBEA MMMs for CO2/N2 separation. The mesoporous channels of TiO2 increased the density of active sites with high accessibility and also facilitate the diffusion of CO2 in the gas separation process. Furthermore, amine groups ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016