Capillary origami: superhydrophobic ribbon surfaces and liquid marbles
نویسندگان
چکیده
In the wetting of a solid by a liquid it is often assumed that the substrate is rigid. However, for an elastic substrate the rigidity depends on the cube of its thickness and so reduces rapidly as the substrate becomes thinner as it approaches becoming a thin sheet. In such circumstances, it has been shown that the capillary forces caused by a contacting droplet of a liquid can shape the solid rather than the solid shaping the liquid. A substrate can be bent and folded as a (pinned) droplet evaporates or even instantaneously and spontaneously wrapped on contact with a droplet. When this effect is used to create three dimensional shapes from initially flat sheets, the effect is called capillary origami or droplet wrapping.In this work, we consider how the conditions for the spontaneous, capillary induced, folding of a thin ribbon substrate might be altered by a rigid surface structure that, for a rigid substrate, would be expected to create Cassie-Baxter and Wenzel effects. For smooth thin substrates, droplet wrapping can occur for all liquids, including those for which the Young's law contact angle (defined by the interfacial tensions) is greater than 90° and which would therefore normally be considered relatively hydrophobic. However, consideration of the balance between bending and interfacial energies suggests that the tendency for droplet wrapping can be suppressed for some liquids by providing the flexible solid surface with a rigid topographic structure. In general, it is known that when a liquid interacts with such a structure it can either fully penetrate the structure (the Wenzel case) or it can bridge between the asperities of the structure (the Cassie-Baxter case).In this report, we show theoretically that droplet wrapping should occur with both types of solid-liquid contact. We also derive a condition for the transition between the Cassie-Baxter and Wenzel type droplet wrapping and relate it to the same transition condition known to apply to superhydrophobic surfaces. The results are given for both droplets being wrapped by thin ribbons and for solid grains encapsulating droplets to form liquid marbles.
منابع مشابه
Liquid marbles: topical context within soft matter and recent progress.
The study of particle stabilized interfaces has a long history in terms of emulsions, foams and related dry powders. The same underlying interfacial energy principles also allow hydrophobic particles to encapsulate individual droplets into a stable form as individual macroscopic objects, which have recently been called "Liquid Marbles". Here we discuss conceptual similarities to superhydrophobi...
متن کاملFreezing of a liquid marble.
In this study, we present for the first time the observations of a freezing liquid marble. In the experiment, liquid marbles are gently placed on the cold side of a thermo-electric cooler (TEC), and the morphological changes are recorded and characterized thereafter. These liquid marbles are noticed to undergo a shape transition from a spherical to a flying-saucer-shaped morphology. The freezin...
متن کاملHybrid surface design for robust superhydrophobicity.
Surfaces may be rendered superhydrophobic by engineering the surface morphology to control the extent of the liquid-air interface and by the use of low-surface-energy coatings. The droplet state on a superhydrophobic surface under static and dynamic conditions may be explained in terms of the relative magnitudes of the wetting and antiwetting pressures acting at the liquid-air interface on the ...
متن کاملHierarchical roughness optimization for biomimetic superhydrophobic surfaces.
Superhydrophobic surfaces should have high contact angles (CA) with water and low contact angle hysteresis (CAH). High CA may be achieved by increasing surface roughness, while in order to have low CAH, superhydrophobic surfaces should be able to form a stable composite interface with air pockets between solid and liquid. Capillary waves, nanodroplets condensation, hydrophilic spots due to chem...
متن کاملSuperhydrophobic and superhydrophilic plant surfaces: an inspiration for biomimetic materials.
The diversity of plant surface structures, evolved over 460 million years, has led to a large variety of highly adapted functional structures. The plant cuticle provides structural and chemical modifications for surface wetting, ranging from superhydrophilic to superhydrophobic. In this paper, the structural basics of superhydrophobic and superhydrophilic plant surfaces and their biological fun...
متن کامل