Tough germanium nanoparticles under electrochemical cycling.
نویسندگان
چکیده
Mechanical degradation of the electrode materials during electrochemical cycling remains a serious issue that critically limits the capacity retention and cyclability of rechargeable lithium-ion batteries. Here we report the highly reversible expansion and contraction of germanium nanoparticles under lithiation-delithiation cycling with in situ transmission electron microscopy (TEM). During multiple cycles to the full capacity, the germanium nanoparticles remained robust without any visible cracking despite ∼260% volume changes, in contrast to the size-dependent fracture of silicon nanoparticles upon the first lithiation. The comparative in situ TEM study of fragile silicon nanoparticles suggests that the tough behavior of germanium nanoparticles can be attributed to the weak anisotropy of the lithiation strain at the reaction front. The tough germanium nanoparticles offer substantial potential for the development of durable, high-capacity, and high-rate anodes for advanced lithium-ion batteries.
منابع مشابه
Surface-stabilized amorphous germanium nanoparticles for lithium-storage material.
Amorphous Ge nanoparticles with the particle size of approximately 10 nm were prepared by capping butyl groups and were characterized using XAS, TEM, FT-IR reflectance, and electrochemical cycling. The XAS results for the first-cycle Ge nanoparticles exhibited either a little particle aggregation after reformation of the Ge-Ge metallic bond or reformation of Ge-Ge metallic bond followed by a li...
متن کاملNovel Germanium/Polypyrrole Composite for High Power Lithium-ion Batteries
Nano-Germanium/polypyrrole composite has been synthesized by chemical reduction method in aqueous solution. The Ge nanoparticles were directly coated on the surface of the polypyrrole. The morphology and structural properties of samples were determined by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Thermogravimetric analysis was carried out to determine...
متن کاملSynthesis of Ytterbium Tungstate with Excellent Pseudocapacitive Behavior and a High Cycling Stability Material for Supercapacitors
Nanoparticles of ytterbium tungstate prepared through the direct addition of an Yb3+ solution to a tungstate solution, were computed through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS). Further the supercapacitive characteristics of the nanoparticles, as a potential material for constructing electrodes, were eval...
متن کاملApplication of copper oxide nanoparticles modified glassy carbon electrode for electrocatalytic oxidation of methanol
Copper nanoparticles were fabricated by electro-reduction of CuSO4solution in the presence of cetyltrimethylammonium bromide (CTAB) cationic surfactant as an additive through potentiostatic method. The prepared copper nanoparticles were characterized by scanning electron microscopy (SEM) and electrochemical methods. The SEM images reveal that the nanoparticles with diameters at about 70 n...
متن کاملIn-situ growth of MnO2 crystals under nanopore-constraint in carbon nanofibers and their electrochemical performance
Growing MnO2 nanocrystals in the bulk of porous carbon nanofibers is conducted in a KMnO4 aqueous solution aimed to enhance the electrochemical performance of MnO2. The rate of redox reaction between KMnO4 and carbon was controlled by the concentration of KMnO4 in a neutral solution. The MnO2 nanoparticles grow along with (211) crystal faces when the redox reaction happens on the surface of fib...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- ACS nano
دوره 7 4 شماره
صفحات -
تاریخ انتشار 2013