Preparation and Properties of Thin Film Materials with Perovskite Type Structure (mixed Oxides Abo3)
نویسنده
چکیده
Barium Titanate (BaTiO3) and Lithium Niobate (LiNb03) thin films (0,2 to 1 pm) were deposited ont0 Platinum foils and Silicon wafers (M. 1. S. capacitor structure). In the present work, polycristalline films which had been prepared by R. F. cathodic sputtering of ceramic targets were studied. With a substrate temperature below 300 OC during the deposition, good insulating amorphous films with a low dielectric constant were obtained, but with a postdeposition heat treatment (600 OC) the deposits show some ferroelectric properties (high dielectric constant, non linearity, etc...). However, the magnitude of the phenomena is still small and difficult to control, but these encouraging results justify a continuation of the study.
منابع مشابه
A theoretical approach to predict the structural parameters of ABO3 type perovskite oxides
In the present research work two aspects of ABO3 type perovskite has to be studied namely structural and mechanical. We have started our work by making an extensive survey of the literature regarding structral properties of ABO3 type perovskite. There has been found a number of approachces in order to understand structural properties of ABO3 type perovskite such as Experimental approaches, Comp...
متن کاملVacancies Job in Oxide Perovskite Thin Films
Point defects can affect considerably the structural, magnetic, and transport properties of perovskite-structure materials with chemical formula ABO3. Oxygen vacancies (VO), for example, enable ionic conductivity in perovskite-based solid solutions to be used for electrochemical applications such as solid oxide fuel and electrolysis cells [1]. Likewise, VO can distort significantly the equilibr...
متن کاملOxygen Vacancy-Tuned Physical Properties in Perovskite Thin Films with Multiple B-site Valance States
Controlling oxygen content in perovskite oxides with ABO3 structure is one of most critical steps for tuning their functionality. Notably, there have been tremendous efforts to understand the effect of changes in oxygen content on the properties of perovskite thin films that are not composed of cations with multiple valance states. Here, we study the effect of oxygen vacancies on structural and...
متن کاملPreparation, Structure and Selected Catalytic Properties of La2CuO4 Nano Mixed Metal Oxides
The perovskite-structured La2CuO4 nanoparticles have been synthesized via an ultrasonic-assisted co-precipitation route using octanoic acid as organic surfactant, and the phase composition, morphology, lattice parameters and size of nanoparticles are characterized through Fourier transform infrared spectrosco...
متن کاملLayer-by-Layer Epitaxial Growth of Defect-Engineered Strontium Cobaltites.
Control over structure and composition of (ABO3) perovskite oxides offers exciting opportunities since these materials possess unique, tunable properties. Perovskite oxides with cobalt B-site cations are particularly promising, as the range of the cation's stable oxidation states leads to many possible structural frameworks. Here, we report growth of strontium cobalt oxide thin films by molecul...
متن کامل