Pore size or geometry: which determines the shape and inverse-shape selective adsorption of alkane isomers?
نویسنده
چکیده
The adsorption of pure pentane (C(5)) isomers and their ternary mixture is simulated in a series of carbon nanoslits. With decreasing nanoslit pore size, shape selective adsorption first occurs in the order of nC(5) > or = iC(5) > neoC(5) due to the configurational entropy effect, then inverse-shape selective adsorption occurs in the order of nC(5) < iC(5) < or = neoC(5) due to the area entropy effect, and finally no adsorption occurs. The entropy effects lead to a large adsorptive separation among the C(5) isomers from their mixture. Similar behavior has been observed from the simulation of C(5) adsorption in carbon nanotubes with variation in pore size. These results reveal that pore size rather than geometry determines the shape and inverse-shape selective adsorption of alkane isomers in nanopores.
منابع مشابه
A microporous metal-organic framework for gas-chromatographic separation of alkanes.
Microporous metal–organic frameworks (MOFs), which are new types of zeolite analogues, have been paid extensive attention because of their potential applications in gas storage, separation, and catalysis. The modular construction of MOFs allows their pore size and shape to be systematically tuned by the judicious choice of metal-containing secondary building units (SBUs) and/or bridging linkers...
متن کاملInvestigation of the Effect of Atmosphere on the Pores of Sintered Astaloy CrM Steel
Abstract Image analysis is used to study the effect of sintering atmosphere and sintering times on the pores morphology of Astaloy CrM. The pores morphology was described by means of some parameters, Circular Diameter (DC)- which shows the diameter of equivalent circle for comparing the pore size, FElongation and FShape- which have different geometrical meanings. The results have been interpret...
متن کاملOptimum Shape Design of a Radiant Oven by the Conjugate Gradient Method and a Grid Regularization Approach
This study presents an optimization problem for shape design of a 2-D radiant enclosure with transparent medium and gray-diffuse surfaces. The aim of the design problem is to find the optimum geometry of a radiant enclosure from the knowledge of temperature and heat flux over some parts of boundary surface, namely the design surface. The solution of radiative heat transfer is based on the net r...
متن کاملThe Influence of Intrinsic Framework Flexibility on Adsorption in Nanoporous Materials
For applications of metal-organic frameworks (MOFs) such as gas storage and separation, flexibility is often seen as a parameter that can tune material performance. In this work we aim to determine the optimal flexibility for the shape selective separation of similarly sized molecules (e.g., Xe/Kr mixtures). To obtain systematic insight into how the flexibility impacts this type of separation, ...
متن کاملAdsorption and separation of linear and branched alkanes on carbon nanotube bundles from configurational-bias Monte Carlo simulation
The adsorption and separation of linear C1-nC5 and branched C5 isomers alkanes on single-walled carbon nanotube bundles at 300 K have been studied using configurational-bias Monte Carlo simulation. For pure linear alkanes, the limiting adsorption properties at zero coverage exhibit a linear relation with the alkane carbon number; the long alkane is more adsorbed at low pressures, but the revers...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- The journal of physical chemistry. B
دوره 110 17 شماره
صفحات -
تاریخ انتشار 2006