Locating acoustic emission with an amplitude-multiplexed acoustic sensor array based on a modified mach-zehnder interferometer.

نویسندگان

  • J Gong
  • J M Macalpine
  • W Jin
  • Y Liao
چکیده

We report on an amplitude-division-multiplexed interferometric sensor array for locating acoustic emission. Preliminary experiments were carried out with a modified Mach-Zehnder interferometer consisting of two sensing arms and a reference arm and demonstrated a one-dimensional location accuracy of a few centimeters. The system can be extended for two- and three-dimensional location of acoustic emissions by the addition of one or two more sensing arms, respectively, in the interferometer.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Review of Optical Routers in Photonic Networks-on-Chip: A Literature Survey

Due to the increasing growth of processing cores in complex computational systems, all the connection converted bottleneck for all systems. With the protection of progressing and constructing complex photonic connection on chip, optical data transmission is the best choice for replacing with electrical interconnection for the reason of gathering connection with a high bandwidth and insertion lo...

متن کامل

On the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization

A series of tests have been conducted to investigate fatigue damage characterization in corroded welded steel plates using structural health monitoring (SHM) techniques. Acoustic Emission (AE) is a non-destructive testing (NDT) technique with potential applications for locating and monitoring fatigue cracks in service. In the present work, AE is implemented to characterize damage during crack e...

متن کامل

Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type

Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...

متن کامل

Development of Stabilized and High Sensitive Optical Fi- Ber Acoustic Emission System and Its Application

We developed a novel fiber-optic acoustic emission (AE) monitoring system and applied this to gas-leak detection. The system is a Mach-Zehnder, homodyne-type optical fiber laser interferometer with a phase compensation feedback circuit. The phase compensation was given by a piezo-actuator, which can maintain the system at being quadurature condition. The system was demonstrated to measure the i...

متن کامل

TiO2 based surface acoustic wave gas sensor with modified electrode dimensions for enhanced H2 sensing application

The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Applied optics

دوره 40 34  شماره 

صفحات  -

تاریخ انتشار 2001