Thermodynamics and kinetics of the Mg65Cu25Y10 bulk metallic glass forming liquid
نویسندگان
چکیده
The thermodynamics and kinetics of the bulk metallic glass forming Mg65Cu25Y10 liquid were investigated using differential scanning calorimetry and three-point beam bending. The experiments lead to the determination of the thermodynamic functions as well as the viscosity of the supercooled liquid. The viscosity shows a temperature dependence, which is consistent with that of a strong glass similar to Zr–Ti–Cu–Ni–Be bulk metallic glasses or sodium silicate glasses. This contrasts with more fragile conventional metallic glass formers or pure metals. The relatively weak temperature dependence of the thermodynamic functions of the supercooled liquid is related to these sluggish kinetics in the supercooled liquid. Entropy, viscosity, and kinetic glass transition are compared in the frameworks of the fragility concept and the Adam–Gibbs theory. Strong liquid behavior retards the formation of crystals kinetically and thermodynamically. © 1998 American Institute of Physics. @S0021-8979~98!04408-9#
منابع مشابه
The effect of silicon on the glass forming ability of the Cu47Ti34Zr11Ni8 bulk metallic glass forming alloy during processing of composites
Composites of the Cu47Ti34Zr11Ni8 bulk metallic glass, reinforced with up to 30 vol % SiC particles are synthesized and characterized. Results based on x-ray diffraction, optical microscopy, scanning Auger microscopy, and differential scanning calorimetry ~DSC! are presented. During processing of the composites, a TiC layer forms around the SiC particles and Si diffuses into the Cu47Ti34Zr11Ni8...
متن کاملThermodynamics and kinetics of the undercooled liquid and the glass transition of the Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 alloy
Differential scanning calorimetry (DSC) was used to determine the thermodynamic functions of the undercooled liquid and the amorphous phase with respect to the crystalline state of the ~41.2Ti13.8CU125Nilo.OBe22.5 bulk mltallic glass forming alloy. The specific heat capacities of this alloy. in the undercooled liquid, the amorphous state and the crystal were determined. The differences in entha...
متن کاملThe viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid
The viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid was measured using parallel plate rheometry. The measurements were carried out with different heating rates between 0.0167 and 1.167 K/s as well as isothermally. Because of the high thermal stability above the glass transition of this bulk metallic glass former with respect to crystalli...
متن کاملOn the Fragility of Bulk Metallic Glass Forming Liquids
In contrast to pure metals and most non-glass forming alloys, metallic glass-formers are moderately strong liquids in terms of fragility. The notion of fragility of an undercooling liquid reflects the sensitivity of the viscosity of the liquid to temperature changes and describes the degree of departure of the liquid kinetics from the Arrhenius equation. In general, the fragility of metallic gl...
متن کاملVitrification and determination of the crystallization time scales of the bulk-metallic-glass-forming liquid Zr58.5Nb2.8Cu15.6Ni12.8Al10.3
The crystallization kinetics of Zr58.5Nb2.8Cu15.6Ni12.8Al10.3 were studied in an electrostatic levitation ~ESL! apparatus. The measured critical cooling rate is 1.75 K/s. Zr58.5Nb2.8Cu15.6Ni12.8Al10.3 is the first bulk-metallic-glass-forming liquid that does not contain beryllium to be vitrified by purely radiative cooling in the ESL. Furthermore, the sluggish crystallization kinetics enable th...
متن کامل