On the potential application of a numerical optimization of fatigue life with DoE and FEM
نویسنده
چکیده
Shot peening is a complicated and expensive process and many shot peening parameters have an influence on the improvement in fatigue performance. Design of Experiment (DoE) has become a very useful tool to optimize the process by considering the greatest amount of information. With the development of computer ability, the Finite Element Method (FEM) has been widely used to simulate this dynamic shot peening process. The Navarro-Rios model has been well developed for the prediction of the fatigue life after shot peening. Therefore, the objective of this work is to integrate these tools in order to establish a numerical OFDF system (Optimisation Fatigue life with DoE and FEM). With this system, it is possible to simulate the shot peening process, to predict the fatigue life of the shot peened component and to optimize the controlled shot peening process.
منابع مشابه
Determination of settlement trough width and optimization of soil behavior parameters based on the design of experiment method (DOE)
The expansion of the settlement trough is an important factor in the risk assessment of the tunneling induced settlement. The increase of settlement trough requires buildings to be included in the impact zone, which causes damages. This paper conducts estimation of the settlement trough width (STW) using empirical approaches, field measurement data and numerical solutions. The credibility of th...
متن کاملEFFECTS OF THE HARDENED NICKEL COATING ON THE FATIGUE BEHAVIOR OF CK45 STEEL: EXPERIMENTAL, FINITE ELEMENT METHOD, AND ARTIFICIAL NEURAL NETWORK MODELING
Hardened nickel coating is widely used in many industrial applications and manufacturing processes because of its benefits in improving the corrosion fatigue life. It is clear that increasing the coating thickness provides good protection against corrosion. However, it reduces the fatigue life. Thus, applying a thin layer of coated nickel might give an acceptable corrosion protection with minim...
متن کاملApplication of Multi-objective Optimization for Optimization of Half-toroidal Continuously Variable Transmission
Among different goals defined in vehicle design process, fuel consumption (FC) is one of the most important objectives, which significantly has taken into account lately, both by the customers and vehicle manufacturers. One of the significant parameters which impacts the vehicle FC is the efficiency of vehicle's power train. In this paper, a half-toroidal continuously variable transmission (CVT...
متن کاملDesign, Optimization and FEM Analysis of a Surface-Mounted Permanent-magnet Brushless DC Motor
In this paper a fast analytical algorithm for design a surface-mounted PM Brushless DC motor (SMPM-BLDC) for variable-speed application based on electromagnetic field analysis and RSM optimization algorithm is discussed. To achieve the desired performance, the physical dimensions of the proposed SMPM-BLDC motor subject to minimal ripple torque utilizing RSM optimization algorithm were optimized...
متن کاملExperimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes
In this paper, the effect of interference fit on fatigue life of holed plate of mechanical joints was investigated experimentally. Fatigue tests were carried out on the holed specimens of Al-alloy 7075-T6 alloy. The interference fit process consists of force fitting a fastener into the hole with a negative clearance (diameter of the fastener is larger than of the hole) that produces beneficial ...
متن کامل