W-band Woi13e Figure Measurement Designed Fofl On-wafer Characterisation
نویسندگان
چکیده
The first fully automated noise and S-parameter measurement bench is reported for W-band on-wafer characterisation. A calibration procedure is described that allows the receiver reference plane tc, be accurately moved to i:he probe tip.
منابع مشابه
Design of an S-band Ultra-low-noise Amplifier with Frequency Band Switching Capability
In this paper, an ultra-low-noise amplifier with frequency band switching capability is designed, simulated and fabricated. The two frequency ranges of this amplifier consist of the 2.4 to 2.5 GHz and 3.1 GHz to 3.15 GHz frequency bands. The designed amplifier has a noise figure of less than 1dB, a minimum gain of 23 dB and a VSWR of less than 2 in the whole frequency band. The design process s...
متن کاملA W-band Simultaneously Matched Power and Noise Low Noise Amplifier Using CMOS 0.13µm
A complete procedure for the design of W-band low noise amplifier in MMIC technology is presented. The design is based on a simultaneously power and noise matched technique. For implementing the method, scalable bilateral transistor model parameters should be first extracted. The model is also used for transmission line utilized in the amplifier circuit. In the presented method, input/output ma...
متن کاملFunctional Testing and Characterisation of ISFETs on Wafer Level by Means of a Micro-droplet Cell#
A wafer-level functionality testing and characterisation system for ISFETs (ionsensitive field-effect transistor) is realised by means of integration of a specifically designed capillary electrochemical micro-droplet cell into a commercial wafer prober-station. The developed system allows the identification and selection of “good” ISFETs at the earliest stage and to avoid expensive bonding, enc...
متن کاملMicromachined Cavity Resonator Sensors for on Chip Material Characterisation in the 220–330 GHz band
A silicon micromachined waveguide on-chip sensor for J-band (220-325 GHz) is presented. The sensor is based on a micromachined cavity resonator provided with an aperture in the top side of a hollow waveguide for sensing purposes. The waveguide is realized by microfabrication in a silicon wafer, gold metallized and assembled by thermocompression bonding. The sensor is used for measuring the comp...
متن کاملApplication of IVS Overlay Measurement to Wafer Deformation Characterization Study
This work revealed one of the applications of overlay error measurement on investigation of GaAs wafer distortion during the normal high-temperature thermal process (above 800°C), using IVS overlay system. The results showed good correlation between the IVS overlay measurement and the temperature variation maps of the wafers obtained from temperature graduation experiments and electrical tests....
متن کامل