Space Vector Double Frame Field Oriented Control of Six Phase Induction Motors
نویسندگان
چکیده
Abstract: – In this paper a new rotor field orientation control of six phase induction machine is proposed. The machine has two three phase windings spatially shifted by 30 electrical degrees. The dynamic model of the machine is based on the three two dimensional orthogonal subspaces. The proposed method uses a simple estimator for identifying rotor flux and its orientation. To eliminate the extra harmonic currents of stator windings that produce losses, space vector PWM technique and double synchronous frame current controller is employed. The simulation results illustrate the validity and efficiency of the proposed method.
منابع مشابه
Tuning of fuzzy controller coefficients in direct torque control with space vector modulator for the three phase induction motors drive using Metaheuristic algorithms with considering electrical faults.
Among all the drive control methods of induction motors, the Direct Torque Control (DTC) method operates independently of the rotor parameters of the machine and, despite its simplicity, provides good torque control in both stable and transient modes. The use of residual comparators in these drives reduces the torque ripple and variable switching frequency. The most common solution is the use o...
متن کاملInvestigation of SLIM Dynamic Models Based on Vector Control for Railway Applications
Although, Single-Sided Linear Induction Motor (SLIM) utilization has increased in railway applications due to their numerous advantages in comparison to Rotational Induction Motors (RIM), there are some sophistication in their mathematical models and electrical drive. This paper focuses on the problems of SLIM modeling, with assuming end-effect on the basis of Field Oriented Control (FOC) as a ...
متن کاملArtificial Neural Network Control of Vector Controlled Induction Motor
Many researches have been carried out to induction motors for starting, braking, speed reversal and speed control, because they are relatively cheap, reliable and rugged machines due to absence of slip rings or commutators. Induction motors exhibit highly coupled, nonlinear time varying system which is difficult to control since some state variables are difficult to be measured. However, recent...
متن کاملSpace Vector Pulse Width Modulation with Reduced Common Mode Voltage and Current Losses for Six-Phase Induction Motor Drive with Three-Level Inverter
Common-mode voltage (CMV) generated by the inverter causes motor bearing failures in multiphase drives.On the other hand, presence of undesired z-component currents in six-phase induction machine (SPIM) leads to extra current losses and have to be considered in pulse width modulation (PWM) techniques. In this paper, it is shown that the presence of z-component currents and CMV in six phase driv...
متن کاملComparison Between Direct and Indirect Field Oriented Control of Induction Motor
Vector control, also called fieldoriented control (FOC), is a Variable frequency Drive (VFD) control method in which the stator currents of a 3 phase induction motor are identified as two orthogonal components that can be visualized with a vector. The vector control of induction motors is one of the most suitable and popular speed control technique presently used. The vector control technique d...
متن کامل